20%
We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: LED segment
Downloaded: 18 times
Not followed.
License: MIT license
Download [513.46KB]AlphaNum G 2 Click is a compact add-on board that represents an easy solution for adding numeric or hexadecimal displays to your application. This board features the LTP-3862, a dual-digit 16-segment alphanumeric green display from Lite-ON. It is a 0.3” (7.62mm) display with black face and white segments. The LED segments use common anodes, and besides segments, the decimal point (DP) dot is also available.
[learn more]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Power Switch
Downloaded: 14 times
Not followed.
License: MIT license
Download [500.09KB]Current Limit 9 Click is a compact add-on board representing a current-limiting solution for your application. This board features the NPS4053, a load switch with a precision adjustable current limit from Nexperia. It is a 5.5V, 55mΩ load switch that allows precise adjustment of the current limit in a range of 110mA up to 2.5A while preserving the constant current during the current limiting.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Rotary encoder
Downloaded: 20 times
Not followed.
License: MIT license
Download [600.35KB]Rotary B 2 Click is a compact add-on board that allows you to add a precision input knob to your design. This board features the TLC5925, a low-power 16-channel constant-current LED sink driver from Texas Instruments that, combined with a high-quality rotary encoder from ALPS, the EC12D1564402, allows you to add a precision input knob to your design. It also features an LED ring composed of 16 individual blue LEDs that can be used to represent the encoder position more visually.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: UWB
Downloaded: 29 times
Not followed.
License: MIT license
Download [628.19KB]UWB 3 Click is a compact add-on board that brings Ultra-Wideband communication to your application. This board features the DWM3001, a fully integrated UWB transceiver module from Qorvo. The module integrates the DW3110 IC, nRF52833 MCU, planar UWB antenna, accelerometer, power management, and crystal. It is a fully calibrated, tested, and validated design. This Click board™ makes the perfect solution for the development of precision real-time location systems (RTLS) using two-way ranging or TDoA schemes in various markets, location-aware wireless sensor networks (WSNs), and more.
[learn more] 
Author: Alcides Ramos
Last Updated: 2023-12-09
Package Version: 1.0.0.0
Category: Communication
Downloaded: 38 times
Not followed.
License: MIT license
Download [6.55MB]
STM32 FACE RECOGNITION USING HUSKEYLENS
Video:
https://youtu.be/4dw_7VkUMFc
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.6
mikroSDK Library: 2.0.0.0
Category: Brushed
Downloaded: 31 times
Not followed.
License: MIT license
Download [625.73KB]H-Bridge 14 Click is a compact add-on board with an H-Bridge gate driver, also known as a full-bridge pre-driver. This board features the DRV8873, an automotive H-Bridge motor driver from Texas Instruments. The DRV8873 is an N-channel H-Bridge motor driver that can drive one bidirectional brushed DC motor, two unidirectional brushed DC motors, solenoids, or other resistive inductive loads.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Magnetic
Downloaded: 33 times
Not followed.
License: MIT license
Download [586.16KB]3D Hall 4 Click is a compact add-on board that can detect the strength of a magnetic field in all three dimensions. This board features the SENM3Dx, a 3D Hall magnetic sensor from SENIS. It is a CMOS-integrated magnetic field sensor that allows the acquisition of all three magnetic field components at the same time and in the same spot. The sensor is equipped with on-chip EPROM to hold initialization, calibration data, and other settings and definitions.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Miscellaneous
Downloaded: 26 times
Not followed.
License: MIT license
Download [499.86KB]Thunder EMU Click is a compact add-on board that can be used to emulate lightning. This board features circuits that generate an RF signal that mimics lightning strikes. It is a thunder emulator board that allows you to mimic lightning signals that can represent different distances, thus enabling you to debug your lightning detector application for all kinds of scenarios. The RF signal has an effective range of about 5 – 15cm from the emulator antenna of this Click board™ to the sensor antenna.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: LTE IoT
Downloaded: 21 times
Not followed.
License: MIT license
Download [649.51KB]IoT ExpressLink 2 Click is a compact add-on board that allows users to connect to IoT ExpressLink services easily and securely interact with cloud applications and other services. This board features the SARA-R510AWS, an LTE-M AWS IoT EsxpressLink module from u-blox. It supports a comprehensive set of 3GPP Rel. 14 features that are relevant for IoT applications, like improvements to power consumption, coverage, data rate, mobility, and positioning. They are 5G-ready, meaning customers will be able to (software) upgrade their deployed devices once 5G LTE has been fully rolled out by mobile operators, greatly improving end-product scalability and lifetime.
[learn more] 
Author: Paul Fowler
Last Updated: 2023-12-03
Package Version: 1.0.0.0
Category: GLCD
Downloaded: 33 times
Not followed.
License: MIT license
Download [418.65KB]This is the game of BlackJack. Written in MicroBasic on the EasyPic v7 equiped with the LCD and GLCD.
The code uses the EasyPic v7 board's 128x64 GLCD, 2x16 LCD, 7-Segment Display and the PICF45K22.
Instructions are on top of the BlackJack.mpas file.
The goal is to eventually bankrupt the dealer.
