We strongly encourage users to use Package manager for sharing their code on Libstock website, because it boosts your efficiency and leaves the end user with no room for error. [more info]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: EEPROM
Downloaded: 15 times
Not followed.
License: MIT license
Download [413.32KB]EEPROM 13 Click is a compact add-on board that contains a highly reliable, nonvolatile memory solution. This board features the M24M01E, an electrically erasable programmable memory with enhanced hardware write protection for entire memory from STMicroelectronics. Its memory size of 1Mbit is organized as 128K words of 8bits each, with a page size of 256 bytes and an additional 256 bytes of identification page. The identification page can be used to store sensitive application parameters, which can be (later) permanently locked in read-only mode.
[learn more]
Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.4
mikroSDK Library: 2.0.0.0
Category: Port expander
Downloaded: 12 times
Not followed.
License: MIT license
Download [500.87KB]Expand 16 Click is a compact add-on board with a multi-port I/O expander. This board features the FLX6408, a fully configurable 8-bit GPIO expander from ON Semiconductor. It brings eight independently configurable input/output ports, with a 6mA output drive, when configured in the output mode.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: Brushed
Downloaded: 10 times
Not followed.
License: MIT license
Download [512.55KB]H-Bridge click is a high-efficiency dual H-bridge driver Click board™, capable of providing reasonably high current while driving the connected load with up to 7V. Since the used driver IC has two full H-bridge channels, this Click board™ is an ideal solution for driving smaller bipolar stepper motors. H-Bridge click provides driving in both directions, with an addition of the brake mode, and the high impedance mode (Hi-Z). Overshoot current suppression algorithm protects the output stages from being damaged if both high-side and low-side MOSFETs on a single H-bridge channel become conductive.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: Environmental
Downloaded: 7 times
Not followed.
License: MIT license
Download [602.31KB]EZO Carrier Click - Oxygen is a compact add-on board suitable for determining the dissolved oxygen of a liquid in your application. This board features the EZO-DO™, an ISO 5814 compliant embedded dissolved oxygen circuit board from Atlas Scientific.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: USB
Downloaded: 13 times
Not followed.
License: MIT license
Download [608.75KB]FTDI Click is a compact add-on board that provides a high-speed USB to a serial interface converter. This board features the FT2232H, a 5th-generation high-speed USB 2.0 to a serial UART/I2C/SPI interface converter from FTDI. The entire USB protocol is handled on the chip (FTDI USB drivers required), making this board ideal for various USB applications. Besides a selectable interface and a standalone operation possibility, it also includes an EEPROM which contains the USB configuration descriptors for the FT2232H and one DA converter for additional reference in user-configurable applications.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: BT/BLE
Downloaded: 11 times
Not followed.
License: MIT license
Download [452.78KB]BT Audio 2 Click is Bluetooth audio stream add on board based on BM62 module from Microchip. It's a Stereo Audio module which is fully qualified Bluetooth v5.0 dual-mode (BDR/EDR/BLE) to be added in any wireless audio and voice application. With features like high resolution up to 24-bit, 96 kHz audio data format, Bluetooth Low Energy data rate up to 1Mbits/s, connection of two hosts with HFP/A2DP profiles simultaneously, seamless serial data over UART interface and many more it's perfect solution for applications like portable speakers and headsets.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: LED segment
Downloaded: 12 times
Not followed.
License: MIT license
Download [408.12KB]LED Flash 3 Click is a compact add-on board representing a powerful flash/torch solution. This board features the KTD2691, an inductor-less, single-flash LED driver from Kinetic Technologies. It includes one current source that can drive up to 1.5A of LED flash current or up to 376mA of torch current.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: ADC
Downloaded: 12 times
Not followed.
License: MIT license
Download [271.73KB]AN to PWM 2 Click is a compact add-on board that contains an easy-to-use component that converts the value of the input analog signal to a fixed frequency PWM voltage output, with a duty cycle proportional to the input voltage. This board features the LTC6992CS6, a silicon oscillator with an easy-to-use analog voltage-controlled pulse width modulation (PWM) capability from Analog Devices. It features the PWM signal controlled by analog input in range of -2.5V to 2.5V, frequency range up to 1 MHz, frequency error less than 1.7%, and it has good temperature stability. It has many features that make it well suited for heater control, PWM servo loops, LED dimming, signal isolation, and other duty cycle control applications.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.2
mikroSDK Library: 2.0.0.0
Category: Boost
Downloaded: 10 times
Not followed.
License: MIT license
Download [632.73KB]BATT Boost Click is a compact add-on board that expands a coin battery cell's lifetime and current capability, like the CR2032 and lithium thionyl batteries. This board features the NBM5100A, a coin-cell battery life booster with adaptive power optimization from Nexperia. It is a battery energy management device designed to maximize usable capacity from non-rechargeable, primary batteries when used in low-voltage, low-power applications requiring burst current loads. The devices overcome voltage drop and battery life limitations associated with extracting high pulse currents.
[learn more] Author: MIKROE
Last Updated: 2024-04-03
Package Version: 2.1.0.3
mikroSDK Library: 2.0.0.0
Category: 1-Wire
Downloaded: 18 times
Not followed.
License: MIT license
Download [493.51KB]iButton click - is an iButton™ probe Click board™. The iButton is a Analog Devices technology based on Analog's 1-Wire® communication protocol, and a chip usually packed in a robust stainless steel casing. The button-shaped iButton device has two contacts - the lid and the base. These contacts carry the necessary connections down to a sensitive silicone chip, embedded inside the metal button. When the iButton touches the reader probe on the Click board™, it establishes the communication with the host MCU, via the 1-Wire® interface. The communication is almost instant, so it is enough to press the iButton lightly to the probe contacts.
[learn more] 
