surfacetemp  2.0.0.0
Main Page

Surface Temp click

Surface temp Click is high accuracy digital temperature sensor Click boardâ„¢, offering breakthrough performance over a wide industrial range. It is equipped with the ADT7420 - an accurate 16-Bit Digital I2C temperature sensor from Analog Devices.

click Product page


Click library

  • Author : MikroE Team
  • Date : Jul 2020.
  • Type : I2C type

Software Support

We provide a library for the SurfaceTemp Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for SurfaceTemp Click driver.

Standard key functions :

Example key functions :

  • Getting temperature value

    float surfacetemp_get_temperature ( surfacetemp_t *ctx );

  • Setting hysteresis value

    uint8_t surfacetemp_set_hysteresis ( surfacetemp_t *ctx, uint8_t hysteresis );

  • Device initialization

    uint8_t surfacetemp_setup ( surfacetemp_t *ctx );

Examples Description

This example demonstrates the use of Surface Temp Click.

The demo application is composed of two sections :

Application Init

Initalizes the driver and configures the click board.

void application_init ( void )
{
log_cfg_t log_cfg;
uint8_t status;
// Logger initialization.
LOG_MAP_USB_UART( log_cfg );
log_cfg.level = LOG_LEVEL_DEBUG;
log_cfg.baud = 115200;
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
SURFACETEMP_MAP_MIKROBUS( cfg, MIKROBUS_1 );
surfacetemp_init( &surfacetemp, &cfg );
status = surfacetemp_setup( &surfacetemp );
surfacetemp_set_high_threshold( &surfacetemp, 40.00 );
surfacetemp_set_low_threshold( &surfacetemp, 10.00 );
surfacetemp_set_critical_threshold( &surfacetemp, 70.00 );
surfacetemp_set_hysteresis( &surfacetemp, 0 );
if ( status == 0 )
{
log_printf( &logger, "--- INIT DONE --- \r\n" );
}
else
{
log_printf( &logger, "--- INIT ERROR --- \r\n" );
for( ; ; );
}
Delay_ms( 1000 );
}

Application Task

Reads the temperature in Celsius and displays the value on the USB UART each second.

void application_task ( void )
{
float temperature;
temperature = surfacetemp_get_temperature( &surfacetemp );
log_printf( &logger, "> Temperature : %.2f \r\n", temperature );
Delay_ms( 1000 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.SurfaceTemp

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.


surfacetemp_get_temperature
float surfacetemp_get_temperature(surfacetemp_t *ctx)
Getting temperature value.
application_task
void application_task(void)
Definition: main.c:72
surfacetemp_set_hysteresis
uint8_t surfacetemp_set_hysteresis(surfacetemp_t *ctx, uint8_t hysteresis)
Setting hysteresis value.
surfacetemp_cfg_t
Click configuration structure definition.
Definition: surfacetemp.h:147
surfacetemp_set_critical_threshold
uint8_t surfacetemp_set_critical_threshold(surfacetemp_t *ctx, float high_threshold)
Setting critical threshold limit.
surfacetemp_init
SURFACETEMP_RETVAL surfacetemp_init(surfacetemp_t *ctx, surfacetemp_cfg_t *cfg)
Initialization function.
surfacetemp_cfg_setup
void surfacetemp_cfg_setup(surfacetemp_cfg_t *cfg)
Config Object Initialization function.
SURFACETEMP_MAP_MIKROBUS
#define SURFACETEMP_MAP_MIKROBUS(cfg, mikrobus)
Definition: surfacetemp.h:52
surfacetemp_set_high_threshold
uint8_t surfacetemp_set_high_threshold(surfacetemp_t *ctx, float high_threshold)
Setting high threshold limit.
surfacetemp_setup
uint8_t surfacetemp_setup(surfacetemp_t *ctx)
Device initialization.
application_init
void application_init(void)
Definition: main.c:32
surfacetemp_set_low_threshold
uint8_t surfacetemp_set_low_threshold(surfacetemp_t *ctx, float high_threshold)
Setting low threshold limit.