Go to the documentation of this file.
39 #ifdef PREINIT_SUPPORTED
43 #ifdef MikroCCoreVersion
44 #if MikroCCoreVersion >= 1
49 #include "drv_digital_out.h"
50 #include "drv_digital_in.h"
51 #include "drv_one_wire.h"
73 #define THERMOSTAT2_CMD_WRITE_SCRATCHPAD 0x4E
74 #define THERMOSTAT2_CMD_READ_SCRATCHPAD 0xBE
75 #define THERMOSTAT2_CMD_COPY_SCRATCHPAD 0x48
76 #define THERMOSTAT2_CMD_CONVERT_TEMPERATURE 0x44
77 #define THERMOSTAT2_CMD_RECALL_SCRATCHPAD 0xB8
78 #define THERMOSTAT2_CMD_READ_POWER_SUPPLY 0xB4
96 #define THERMOSTAT2_CONFIG_RESOLUTION_9BIT 0x00
97 #define THERMOSTAT2_CONFIG_RESOLUTION_10BIT 0x20
98 #define THERMOSTAT2_CONFIG_RESOLUTION_11BIT 0x40
99 #define THERMOSTAT2_CONFIG_RESOLUTION_12BIT 0x60
100 #define THERMOSTAT2_CONFIG_RESOLUTION_BIT_MASK 0x60
101 #define THERMOSTAT2_CONFIG_RESERVED_BITS 0x1F
107 #define THERMOSTAT2_FAMILY_CODE 0x10
113 #define THERMOSTAT2_RESOLUTION_9BIT 0.5
114 #define THERMOSTAT2_RESOLUTION_10BIT 0.25
115 #define THERMOSTAT2_RESOLUTION_11BIT 0.125
116 #define THERMOSTAT2_RESOLUTION_12BIT 0.0625
122 #define THERMOSTAT2_DEFAULT_RESOLUTION THERMOSTAT2_CONFIG_RESOLUTION_9BIT
123 #define THERMOSTAT2_DEFAULT_TEMP_HIGH_ALARM 0xFF
124 #define THERMOSTAT2_DEFAULT_TEMP_LOW_ALARM 0x00
130 #define THERMOSTAT2_RELAY_ON 0x01
131 #define THERMOSTAT2_RELAY_OFF 0x00
132 #define THERMOSTAT2_TEMPERATURE_LIMIT 28.0
150 #define THERMOSTAT2_MAP_MIKROBUS( cfg, mikrobus ) \
151 cfg.gp0 = MIKROBUS( mikrobus, MIKROBUS_PWM ); \
152 cfg.cs = MIKROBUS( mikrobus, MIKROBUS_CS );
324 #endif // THERMOSTAT2_H
one_wire_rom_address_t rom_addr
Definition: thermostat2.h:168
digital_out_t cs
Definition: thermostat2.h:163
uint8_t config
Definition: thermostat2.h:169
Thermostat 2 Click configuration object.
Definition: thermostat2.h:178
@ THERMOSTAT2_OK
Definition: thermostat2.h:191
err_t thermostat2_read_temperature(thermostat2_t *ctx, float *temperature)
Thermostat 2 read temperature function.
err_t thermostat2_default_cfg(thermostat2_t *ctx)
Thermostat 2 default configuration function.
err_t thermostat2_check_communication(thermostat2_t *ctx)
Thermostat 2 check communication function.
void thermostat2_relay_state(thermostat2_t *ctx, uint8_t state)
Thermostat 2 relay state function.
pin_name_t gp0
Definition: thermostat2.h:180
@ THERMOSTAT2_ERROR
Definition: thermostat2.h:192
one_wire_t ow
Definition: thermostat2.h:166
thermostat2_return_value_t
Thermostat 2 Click return value data.
Definition: thermostat2.h:190
err_t thermostat2_init(thermostat2_t *ctx, thermostat2_cfg_t *cfg)
Thermostat 2 initialization function.
err_t thermostat2_start_measurement(thermostat2_t *ctx)
Thermostat 2 start measurement function.
err_t thermostat2_write_scratchpad(thermostat2_t *ctx, uint8_t temp_high, uint8_t temp_low, uint8_t config)
Thermostat 2 write scratchpad function.
pin_name_t cs
Definition: thermostat2.h:181
void thermostat2_cfg_setup(thermostat2_cfg_t *cfg)
Thermostat 2 configuration object setup function.
err_t thermostat2_read_scratchpad(thermostat2_t *ctx, uint8_t *scratchpad)
Thermostat 2 read scratchpad function.
Thermostat 2 Click context object.
Definition: thermostat2.h:162