Go to the documentation of this file.
39 #ifdef PREINIT_SUPPORTED
43 #ifdef MikroCCoreVersion
44 #if MikroCCoreVersion >= 1
49 #include "drv_digital_out.h"
50 #include "drv_digital_in.h"
51 #include "drv_i2c_master.h"
73 #define THERMO30_CMD_SINGLE_SHOT_CLK_STR_EN_REP_HIGH 0x2C06
74 #define THERMO30_CMD_SINGLE_SHOT_CLK_STR_EN_REP_MID 0x2C0D
75 #define THERMO30_CMD_SINGLE_SHOT_CLK_STR_EN_REP_LOW 0x2C10
76 #define THERMO30_CMD_SINGLE_SHOT_CLK_STR_DIS_REP_HIGH 0x2400
77 #define THERMO30_CMD_SINGLE_SHOT_CLK_STR_DIS_REP_MID 0x240B
78 #define THERMO30_CMD_SINGLE_SHOT_CLK_STR_DIS_REP_LOW 0x2416
79 #define THERMO30_CMD_PERIODIC_0p5_MPS_REP_HIGH 0x2032
80 #define THERMO30_CMD_PERIODIC_0p5_MPS_REP_MID 0x2024
81 #define THERMO30_CMD_PERIODIC_0p5_MPS_REP_LOW 0x202F
82 #define THERMO30_CMD_PERIODIC_1_MPS_REP_HIGH 0x2130
83 #define THERMO30_CMD_PERIODIC_1_MPS_REP_MID 0x2126
84 #define THERMO30_CMD_PERIODIC_1_MPS_REP_LOW 0x212D
85 #define THERMO30_CMD_PERIODIC_2_MPS_REP_HIGH 0x2236
86 #define THERMO30_CMD_PERIODIC_2_MPS_REP_MID 0x2220
87 #define THERMO30_CMD_PERIODIC_2_MPS_REP_LOW 0x222B
88 #define THERMO30_CMD_PERIODIC_4_MPS_REP_HIGH 0x2334
89 #define THERMO30_CMD_PERIODIC_4_MPS_REP_MID 0x2322
90 #define THERMO30_CMD_PERIODIC_4_MPS_REP_LOW 0x2329
91 #define THERMO30_CMD_PERIODIC_10_MPS_REP_HIGH 0x2737
92 #define THERMO30_CMD_PERIODIC_10_MPS_REP_MID 0x2721
93 #define THERMO30_CMD_PERIODIC_10_MPS_REP_LOW 0x272A
94 #define THERMO30_CMD_FETCH_DATA 0xE000
95 #define THERMO30_CMD_BREAK 0x3093
96 #define THERMO30_CMD_SOFT_RESET 0x30A2
97 #define THERMO30_CMD_HEATER_ENABLE 0x306D
98 #define THERMO30_CMD_HEATER_DISABLE 0x3066
99 #define THERMO30_CMD_READ_STATUS 0xF32D
100 #define THERMO30_CMD_CLEAR_STATUS 0x3041
101 #define THERMO30_CMD_GET_SERIAL_NUM 0x3780
107 #define THERMO30_PIN_STATE_HIGH 0x01
108 #define THERMO30_PIN_STATE_LOW 0x00
114 #define THERMO30_DATA_RESOLUTION 65535.0f
115 #define THERMO30_ABS_MIN_TEMP -45.0f
116 #define THERMO30_ABS_MAX_TEMP 175.0f
123 #define THERMO30_DEVICE_ADDRESS_GND 0x4A
124 #define THERMO30_DEVICE_ADDRESS_VCC 0x4B
142 #define THERMO30_MAP_MIKROBUS( cfg, mikrobus ) \
143 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
144 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \
145 cfg.rst = MIKROBUS( mikrobus, MIKROBUS_RST ); \
146 cfg.alr = MIKROBUS( mikrobus, MIKROBUS_INT )
@ THERMO30_ERROR
Definition: thermo30.h:195
err_t thermo30_read_status(thermo30_t *ctx, uint16_t *status_val)
Thermo 30 read status function.
uint8_t slave_address
Definition: thermo30.h:167
pin_name_t alr
Definition: thermo30.h:181
thermo30_return_value_t
Thermo 30 Click return value data.
Definition: thermo30.h:193
err_t thermo30_stop_measurement(thermo30_t *ctx)
Thermo 30 stop measurement function.
uint8_t thermo30_get_alert_pin(thermo30_t *ctx)
Thermo 30 get alert pin function.
err_t thermo30_start_measurement(thermo30_t *ctx, uint16_t cmd)
Thermo 30 start measurement function.
err_t thermo30_read_command(thermo30_t *ctx, uint16_t cmd, uint16_t *data_out)
Thermo 30 read command function.
void thermo30_hw_reset(thermo30_t *ctx)
Thermo 30 hw reset device function.
digital_out_t rst
Definition: thermo30.h:158
void thermo30_set_rst_pin(thermo30_t *ctx, uint8_t pin_state)
Thermo 30 set rst pin function.
Thermo 30 Click configuration object.
Definition: thermo30.h:176
err_t thermo30_default_cfg(thermo30_t *ctx)
Thermo 30 default configuration function.
uint8_t i2c_address
Definition: thermo30.h:184
digital_in_t alr
Definition: thermo30.h:161
pin_name_t rst
Definition: thermo30.h:180
Thermo 30 Click context object.
Definition: thermo30.h:156
pin_name_t sda
Definition: thermo30.h:178
pin_name_t scl
Definition: thermo30.h:177
i2c_master_t i2c
Definition: thermo30.h:164
uint32_t i2c_speed
Definition: thermo30.h:183
err_t thermo30_read_temperature(thermo30_t *ctx, float *temperature)
Thermo 30 read temperature function.
void thermo30_cfg_setup(thermo30_cfg_t *cfg)
Thermo 30 configuration object setup function.
@ THERMO30_OK
Definition: thermo30.h:194
err_t thermo30_write_command(thermo30_t *ctx, uint16_t cmd)
Thermo 30 write command function.
err_t thermo30_init(thermo30_t *ctx, thermo30_cfg_t *cfg)
Thermo 30 initialization function.