hbridge15
2.1.0.0
|
H-Bridge 15 Click is a compact add-on board with an H-Bridge gate driver, also known as a full-bridge pre-driver. This board features the DRV8834, a dual-bridge stepper or DC motor driver from Texas Instruments.
We provide a library for the H-Bridge 15 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
This library contains API for H-Bridge 15 Click driver.
hbridge15_cfg_setup
Config Object Initialization function. hbridge15_init
Initialization function. hbridge15_default_cfg
Click Default Configuration function. hbridge15_set_pins
H-Bridge 15 set pins function. hbridge15_set_sleep
H-Bridge 15 set sleep function. hbridge15_set_out_state
H-Bridge 15 set output function. This example demonstrates the use of the H-Bridge 15 click board by
driving the motor in both directions with braking and freewheeling.
The demo application is composed of two sections :
Initializes the driver and performs the click default configuration.
This example is driving a motor in both directions with
motor braking and freewheeling in between.
The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.
Other Mikroe Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.