airquality3.h File Reference

This file contains API for Air quality 3 Click driver. More...

#include "mikrosdk_version.h"
#include "drv_digital_out.h"
#include "drv_digital_in.h"
#include "drv_i2c_master.h"

Go to the source code of this file.

Data Structures
struct	airquality3_t
	Click ctx object definition. More...
struct	airquality3_cfg_t
	Click configuration structure definition. More...
struct	airguality3_info_t
	Info structure definition. More...
struct	airquality3_air_data_t
	Air data structure definition. More...

Macros
#define	AIRQUALITY3_MAP_MIKROBUS(cfg, mikrobus)
#define	AIRQUALITY3_RETVAL   uint8_t
#define	AIRQUALITY3_OK   0x00
#define	AIRQUALITY3_INIT_ERROR   0xFF
#define	AIRQUALITY3_REG_ID   0x20
#define	AIRQUALITY3_REG_ERROR_ID   0xE0
#define	AIRQUALITY3_REG_STATUS   0x00
#define	AIRQUALITY3_REG_HW_VERSION   0x21
#define	AIRQUALITY3_REG_FW_BOOT_VERSION   0x23
#define	AIRQUALITY3_REG_FW_APP_VERSION   0x24
#define	AIRQUALITY3_REG_SW_RESET   0xFF
#define	AIRQUALITY3_REG_ALG_DATA   0x02
#define	AIRQUALITY3_REG_RAW_DATA   0x03
#define	AIRQUALITY3_REG_ENV_DATA   0x05
#define	AIRQUALITY3_REG_NTC   0x06
#define	AIRQUALITY3_REG_MEAS_MODE   0x01
#define	AIRQUALITY3_REG_BASELINE   0x11
#define	AIRQUALITY3_DRIVE_MODE_0   ( 0x00 << 4 )
#define	AIRQUALITY3_DRIVE_MODE_1   ( 0x01 << 4 )
#define	AIRQUALITY3_DRIVE_MODE_2   ( 0x02 << 4 )
#define	AIRQUALITY3_DRIVE_MODE_3   ( 0x03 << 4 )
#define	AIRQUALITY3_DRIVE_MODE_4   ( 0x04 << 4 )
#define	AIRQUALITY3_INT_DATARDY_0   ( 0x00 << 3 )
#define	AIRQUALITY3_INT_DATARDY_1   ( 0x01 << 3 )
#define	AIRQUALITY3_INT_THRESH_0   ( 0x00 << 2 )
#define	AIRQUALITY3_INT_THRESH_1   ( 0x01 << 2 )
#define	AIRQUALITY3_APP_START   0xF4
#define	AIRQUALITY3_APP_VERIFY   0xF3
#define	AIRQUALITY3_APP_DATA   0xF2
#define	AIRQUALITY3_APP_ERASE   0xF1
#define	AIRQUALITY3_DEVICE_SLAVE_ADDRESS   0x5A
#define	AIRQUALITY3_POWER_STATE_ON   0
#define	AIRQUALITY3_POWER_STATE_OFF   1

Functions
void	airquality3_cfg_setup (airquality3_cfg_t *cfg)
	Config Object Initialization function. More...
AIRQUALITY3_RETVAL	airquality3_init (airquality3_t *ctx, airquality3_cfg_t *cfg)
	Initialization function. More...
void	airquality3_default_cfg (airquality3_t *ctx)
	Click Default Configuration function. More...
void	airquality3_generic_write (airquality3_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
	Generic write function. More...
void	airquality3_generic_read (airquality3_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
	Generic read function. More...
uint8_t	airquality3_get_starus (airquality3_t *ctx)
	Reads status. More...
void	airquality3_get_device_info (airquality3_t *ctx, airguality3_info_t *info)
	Get device info. More...
void	airquality3_software_reset (airquality3_t *ctx, uint32_t reset)
	Software reset. More...
uint8_t	airquality3_get_co2_and_tvoc (airquality3_t *ctx, airquality3_air_data_t *air_data)
	Get CO2 and TVOC data. More...
void	airquality3_get_raw_data (airquality3_t *ctx, uint16_t *raw_data)
	Function reads raw ADC data values for resistance and current source used. More...
void	airquality3_set_environment_data (airquality3_t *ctx, uint32_t env_data)
	Temperature and humidity data settings. More...
void	airquality3_get_ntc_data (airquality3_t *ctx, uint8_t *data_buf)
	Get NTC value. More...
void	airquality3_set_measurement_mode (airquality3_t *ctx, uint8_t mode)
	Function for settings sensor drive mode and interrupts. More...
void	airquality3_set_baseline (airquality3_t *ctx, uint16_t baseline)
	Function for settings baseline value. More...
void	airquality3_app_function (airquality3_t *ctx, uint8_t app_task)
	function to start APP task More...
void	airquality3_set_power (airquality3_t *ctx, uint16_t pwr_state)
	Function for power ON/OFF chip. More...
void	airquality3_hardware_reset (airquality3_t *ctx)
	Hardware reset. More...
uint8_t	airquality3_get_interrupt_state (airquality3_t *ctx)
	Get interrupt state. More...

Detailed Description

This file contains API for Air quality 3 Click driver.