irsense3  2.0.0.0
Main Page

IR Sense 3 click

IR Sense 3 Click is the infrared sensor Click board, designed to be used for the short range IR sensing applications.

click Product page


Click library

Software Support

We provide a library for the IrSense3 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for IrSense3 Click driver.

Standard key functions :

Example key functions :

Examples Description

Demo application shows detection of human and reading of other parameters such as IR current ..

The demo application is composed of two sections :

Application Init

Configuring clicks and log objects. Software reset and settings the click in the default configuration.

void application_init ( void )
{
log_cfg_t log_cfg;
// Logger initialization.
log_cfg.level = LOG_LEVEL_DEBUG;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
IRSENSE3_MAP_MIKROBUS( cfg, MIKROBUS_1 );
irsense3_init( &irsense3, &cfg );
// Software reset
log_info( &logger, "---- Software reset ----" );
Delay_1sec( );
// Configuration
log_info( &logger, "---- Default config ----" );
irsense3_default_cfg( &irsense3 );
}

Application Task

Reads temperature data, outputs current of IR Sensor and checks for human approach.

void application_task ( void )
{
float temperature;
float ir_current_data;
uint8_t f_detect;
// Detection Object
f_detect = irsense3_human_approach_detect( &irsense3 );
if ( f_detect != 0 )
{
log_printf( &logger, ">> Human Approach detected !!!\r\n" );
Delay_1sec( );
}
// Output current of IR sensor
ir_current_data = irsense3_get_ir_sensor_data( &irsense3 );
log_printf( &logger, ">> IR current data: %.2f pA.\r\n", ir_current_data );
// Temperature
temperature = irsense3_get_temperature_data( &irsense3 );
log_printf( &logger, ">> Temperature: %.2f C.\r\n", temperature );
log_printf( &logger, "----------------------------\r\n" );
Delay_1sec( );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.