Go to the documentation of this file.
38 #include "drv_digital_out.h"
39 #include "drv_digital_in.h"
40 #include "drv_i2c_master.h"
53 #define JOYSTICK2_MAP_MIKROBUS( cfg, mikrobus ) \
54 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
55 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \
56 cfg.rst = MIKROBUS( mikrobus, MIKROBUS_RST ); \
57 cfg.int_pin = MIKROBUS( mikrobus, MIKROBUS_INT );
64 #define JOYSTICK2_RETVAL uint8_t
66 #define JOYSTICK2_OK 0x00
67 #define JOYSTICK2_INIT_ERROR 0xFF
74 #define JOYSTICK2_DEVICE_SLAVE_ADDR_0_0 0x70
75 #define JOYSTICK2_DEVICE_SLAVE_ADDR_0_1 0x71
76 #define JOYSTICK2_DEVICE_SLAVE_ADDR_1_0 0x72
77 #define JOYSTICK2_DEVICE_SLAVE_ADDR_1_1 0x73
84 #define JOYSTICK2_CMD_INPUT_PORT 0x00
85 #define JOYSTICK2_CMD_OUTPUT_PORT 0x01
86 #define JOYSTICK2_CMD_POLARITY_INVERSION 0x02
87 #define JOYSTICK2_CMD_CONFIGURATION 0x03
94 #define JOYSTICK2_CFG_ENABLE_ALL_PORT 0xFF
95 #define JOYSTICK2_CFG_DISABLE_ALL_PORT 0x00
96 #define JOYSTICK2_CFG_ENABLE_BUTTON 0x02
97 #define JOYSTICK2_CFG_ENABLE_LEFT_POS 0x01
98 #define JOYSTICK2_CFG_ENABLE_RIGHT_POS 0x10
99 #define JOYSTICK2_CFG_ENABLE_UP_POS 0x08
100 #define JOYSTICK2_CFG_ENABLE_DOWN_POS 0x04
107 #define JOYSTICK2_POSITION_LEFT 0x01
108 #define JOYSTICK2_POSITION_RIGHT 0x10
109 #define JOYSTICK2_POSITION_UP 0x08
110 #define JOYSTICK2_POSITION_DOWN 0x04
111 #define JOYSTICK2_BUTTON_ACTIVE 0x02
277 #endif // _JOYSTICK2_H_
pin_name_t int_pin
Definition: joystick2.h:157
void joystick2_generic_read(joystick2_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic read function.
pin_name_t rst
Definition: joystick2.h:156
void joystick2_default_cfg(joystick2_t *ctx)
Click Default Configuration function.
Click configuration structure definition.
Definition: joystick2.h:147
digital_out_t rst
Definition: joystick2.h:128
void joystick2_cfg_setup(joystick2_cfg_t *cfg)
Config Object Initialization function.
uint8_t joystick2_get_position(joystick2_t *ctx)
Functions for get Joystick position.
JOYSTICK2_RETVAL joystick2_init(joystick2_t *ctx, joystick2_cfg_t *cfg)
Initialization function.
pin_name_t sda
Definition: joystick2.h:152
void joystick2_set_cfg_register(joystick2_t *ctx, uint8_t cfg_data)
Functions for configuration joystick.
void joystick2_generic_write(joystick2_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic write function.
uint32_t i2c_speed
Definition: joystick2.h:161
#define JOYSTICK2_RETVAL
Definition: joystick2.h:64
digital_in_t int_pin
Definition: joystick2.h:132
uint8_t i2c_address
Definition: joystick2.h:162
i2c_master_t i2c
Definition: joystick2.h:136
pin_name_t scl
Definition: joystick2.h:151
uint8_t slave_address
Definition: joystick2.h:140
Click ctx object definition.
Definition: joystick2.h:124
void joystick2_reset(joystick2_t *ctx)
Functions for reset module.
uint8_t joystick2_get_interrupt_state(joystick2_t *ctx)
Functions for read interrupt state.