Go to the documentation of this file.
38 #include "drv_digital_out.h"
39 #include "drv_digital_in.h"
40 #include "drv_i2c_master.h"
52 #define THERMO6_MAP_MIKROBUS( cfg, mikrobus ) \
53 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
54 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA )
61 #define THERMO6_RETVAL uint8_t
63 #define THERMO6_OK 0x00
64 #define THERMO6_INIT_ERROR 0xFF
71 #define THERMO6_SLAVE_ADDRESS 0x48
78 #define THERMO6_REG_TEMPERATURE 0x00
79 #define THERMO6_REG_CONFIG 0x01
80 #define THERMO6_REG_TEMP_HYST 0x02
81 #define THERMO6_REG_TEMP_OS 0x03
88 #define THERMO6_CFG_ONE_SHOT 0x0001
90 #define THERMO6_CFG_CONVERSION_RATE_0_25 0x0000
91 #define THERMO6_CFG_CONVERSION_RATE_1 0x0002
92 #define THERMO6_CFG_CONVERSION_RATE_4 0x0004
93 #define THERMO6_CFG_CONVERSION_RATE_8 0x0006
95 #define THERMO6_CFG_PEC_ENABLE 0x0008
96 #define THERMO6_CFG_PEC_DISABLE 0x0000
98 #define THERMO6_CFG_TIMEOUT_ENABLE 0x0010
99 #define THERMO6_CFG_TIMEOUT_DISABLE 0x0000
101 #define THERMO6_CFG_RESOLUTION_8 0x0000
102 #define THERMO6_CFG_RESOLUTION_9 0x0020
103 #define THERMO6_CFG_RESOLUTION_10 0x0040
104 #define THERMO6_CFG_RESOLUTION_12 0x0060
106 #define THERMO6_CFG_NORMAL_FORMAT 0x0000
107 #define THERMO6_CFG_EXTENDED_FORMAT 0x0080
109 #define THERMO6_CFG_SHUT_DOWN 0x0100
110 #define THERMO6_CFG_POWER_UP 0x0000
112 #define THERMO6_CFG_COMPARATOR_MODE 0x0000
113 #define THERMO6_CFG_INTERRUPT_MODE 0x0200
115 #define THERMO6_CFG_FAULT_QUEUE_1 0x0000
116 #define THERMO6_CFG_FAULT_QUEUE_2 0x0800
117 #define THERMO6_CFG_FAULT_QUEUE_4 0x1000
118 #define THERMO6_CFG_FAULT_QUEUE_6 0x1800
125 #define THERMO6_TEMP_FORMAT_CELSIUS 0
126 #define THERMO6_TEMP_FORMAT_FAHRENHEIT 2
127 #define THERMO6_TEMP_FORMAT_KELVIN 1
134 #define THERMO6_TEMP_RESOLUTION_12bit 3
135 #define THERMO6_TEMP_RESOLUTION_10bit 2
136 #define THERMO6_TEMP_RESOLUTION_9bit 1
137 #define THERMO6_TEMP_RESOLUTION_8bit 0
320 #endif // _THERMO6_H_
#define THERMO6_RETVAL
Definition: thermo6.h:61
float thermo6_get_temperature_data(thermo6_t *ctx, uint8_t temp_format)
Temperature function.
THERMO6_RETVAL thermo6_init(thermo6_t *ctx, thermo6_cfg_t *cfg)
Initialization function.
void thermo6_set_register_cfg(thermo6_t *ctx, uint16_t cfg_data)
Write configuration function.
void thermo6_set_other_register(thermo6_t *ctx, uint8_t reg, float tx_data)
Set other register.
Click configuration structure definition.
Definition: thermo6.h:166
void thermo6_default_cfg(thermo6_t *ctx)
Click Default Configuration function.
Click ctx object definition.
Definition: thermo6.h:150
i2c_master_t i2c
Definition: thermo6.h:154
uint8_t slave_address
Definition: thermo6.h:158
pin_name_t sda
Definition: thermo6.h:171
uint8_t temp_resolution
Definition: thermo6.h:159
void thermo6_generic_write(thermo6_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic write function.
uint32_t i2c_speed
Definition: thermo6.h:175
uint8_t thermo6_get_over_temp_status(thermo6_t *ctx)
Read over-temperature status function.
void thermo6_cfg_setup(thermo6_cfg_t *cfg)
Config Object Initialization function.
float thermo6_get_other_register(thermo6_t *ctx, uint8_t reg)
Set other register.
uint8_t i2c_address
Definition: thermo6.h:176
pin_name_t scl
Definition: thermo6.h:170
void thermo6_generic_read(thermo6_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic read function.