c3dhall6  2.0.0.0
Main Page

3D Hall 6 click

3D Hall 6 Click is a very accurate, magnetic field sensing Click boardâ„¢, used to measure the intensity of the magnetic field across three perpendicular axes.

![click image](

)

click Product page


Click library

Software Support

We provide a library for the 3dHall6 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for 3dHall6 Click driver.

Standard key functions :

Example key functions :

Examples Description

This application measure the intensity of the magnetic field across three perpendicular axes.

The demo application is composed of two sections :

Application Init

Initializes device.

void application_init ( void )
{
log_cfg_t log_cfg;
// Logger initialization.
log_cfg.level = LOG_LEVEL_DEBUG;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
C3DHALL6_MAP_MIKROBUS( cfg, MIKROBUS_1 );
c3dhall6_init( &c3dhall6, &cfg );
Delay_ms( 300 );
c3dhall6_set_reference_values( &c3dhall6, 3.3, 2048.0, 2048.0, 2048.0, 2048.0 );
}

Application Task

Additional Functions :

  • c3dhall6_log_adc_task() - performs and logs adc measurements on all channels
  • c3dhall6_log_volt_task() - performs and logs voltage measurements on all channels
  • c3dhall6_log_angleRad_task() - performs and logs angle measurements in radians on each die
  • c3dhall6_log_angleDeg_task() - performs and logs angle measurements in degrees on each die
void application_task ( void )
{
Delay_ms( 1000 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.