color2  2.0.0.0
Functions
main.c File Reference

Color2 Click example. More...

#include "board.h"
#include "log.h"
#include "color2.h"

Functions

void application_init (void)
 
void application_task (void)
 
void main (void)
 

Detailed Description

Color2 Click example.

Description

Example demonstrates use of Color 2 click.

The demo application is composed of two sections :

Application Init

Initialization driver enable's - initialize ISL29125 RGB color light sensor and start write log.

Application Task

This is a example which demonstrates the use of Color 2 Click board. ISL29125 RGB color light sensor on Color 2 Click, detects red, green and blue in a variety of lighting conditions and outputting 16-bit resolution data on the USBUART. Also read color and check which color is detected by the sensor. If the color is detected, the detected color message is logged on the USBUART. All data logs on usb uart for aproximetly every 3 sec.

Author
MikroE Team

Function Documentation

◆ application_init()

void application_init ( void  )

Logger initialization. Default baud rate: 115200 Default log level: LOG_LEVEL_DEBUG

Note
If USB_UART_RX and USB_UART_TX are defined as HAL_PIN_NC, you will need to define them manually for log to work. See LOG_MAP_USB_UART macro definition for detailed explanation.

◆ application_task()

void application_task ( void  )

◆ main()

void main ( void  )