joystick  2.0.0.0
Main Page

Joystick click

Joystick click is a smart navigation key concept based on contactless, magnetic movement detection.

click Product page


Click library

  • Author : MikroE Team
  • Date : Nov 2019.
  • Type : I2C type

Software Support

We provide a library for the Joystick Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Joystick Click driver.

Standard key functions :

  • Config Object Initialization function.

    void joystick_cfg_setup ( joystick_cfg_t *cfg );

  • Initialization function.

    JOYSTCIK_RETVAL joystick_init ( joystick_t *ctx, joystick_cfg_t *cfg );

  • Click Default Configuration function.

    void joystick_default_cfg ( joystick_t *ctx );

Example key functions :

Examples Description

This application configures and enables use of the joystick.

The demo application is composed of two sections :

Application Init

Initialization driver enables - device, sets default configuration and starts write log.

void application_init ( void )
{
log_cfg_t log_cfg;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
JOYSTCIK_MAP_MIKROBUS( cfg, MIKROBUS_1 );
joystick_init( &joystick, &cfg );
Delay_100ms( );
joystick_default_cfg( &joystick );
log_printf( &logger, "*********************\r\n" );
log_printf( &logger, " Configuration \r\n" );
log_printf( &logger, "*********************\r\n" );
log_printf( &logger, " Joystick Click \r\n" );
log_printf( &logger, "*********************\r\n" );
Delay_100ms( );
}

Application Task

This is a example which demonstrates the use of Joystick Click board. Joystick Click communicates with register via I2C by write and read from register, read joystick position and press button state. Results are being sent to the Usart Terminal where you can track their changes. All data logs on usb uart when the sensor is triggered.

void application_task ( void )
{
// Task implementation.
Delay_10ms( );
if ( ( button_state == 1 ) && ( button_state_old == 0 ) )
{
log_printf( &logger, " Button is pressed \r\n" );
log_printf( &logger, "*********************\r\n" );
}
if ( ( button_state == 0 ) && ( button_state_old == 1 ) )
{
}
{
switch ( position )
{
case 0 :
{
log_printf( &logger," Start position \r\n" );
break;
}
case 1 :
{
log_printf( &logger, " Top \r\n" );
break;
}
case 2 :
{
log_printf( &logger, " Top-Right \r\n" );
break;
}
case 3 :
{
log_printf( &logger, " Right \r\n" );
break;
}
case 4 :
{
log_printf( &logger, " Bottom-Right \r\n" );
break;
}
case 5 :
{
log_printf( &logger, " Bottom \r\n" );
break;
}
case 6 :
{
log_printf( &logger, " Bottom-Left \r\n" );
break;
}
case 7 :
{
log_printf( &logger, " Left \r\n" );
break;
}
case 8 :
{
log_printf( &logger, " Top-Left \r\n" );
break;
}
}
log_printf( &logger, "*********************\r\n" );
Delay_100ms();
}
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.Joystick

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.


button_state_old
uint8_t button_state_old
Definition: main.c:39
joystick_default_cfg
void joystick_default_cfg(joystick_t *ctx)
Click Default Configuration function.
JOYSTCIK_MAP_MIKROBUS
#define JOYSTCIK_MAP_MIKROBUS(cfg, mikrobus)
Definition: joystick.h:99
position
uint8_t position
Definition: main.c:36
joystick_get_position
uint8_t joystick_get_position(joystick_t *ctx)
Get joystick position function.
application_task
void application_task(void)
Definition: main.c:80
joystick_cfg_setup
void joystick_cfg_setup(joystick_cfg_t *cfg)
Config Object Initialization function.
position_old
uint8_t position_old
Definition: main.c:38
application_init
void application_init(void)
Definition: main.c:43
button_state
uint8_t button_state
Definition: main.c:37
joystick_init
JOYSTCIK_RETVAL joystick_init(joystick_t *ctx, joystick_cfg_t *cfg)
Initialization function.
joystick_cfg_t
Click configuration structure definition.
Definition: joystick.h:152
joystick_press_button
uint8_t joystick_press_button(joystick_t *ctx)
Get state of Joystick button function.