brushless6  2.0.0.0
Main Page

Brushless 6 Click

Brushless 6 Click is designed to drive a three-phase sensorless, brushless motor, also known as the BLDC motor.

Click Product page


Click library

  • Author : MikroE Team
  • Date : Jan 2020.
  • Type : PWM type

Software Support

We provide a library for the Brushless6 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Brushless6 Click driver.

Standard key functions :

Example key functions :

Examples Description

Brushless 6 Click is designed to drive a three-phase sensorless.

The demo application is composed of two sections :

Application Init

This function initializes and configures the logger and the Click board.

void application_init ( void )
{
log_cfg_t log_cfg;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
BRUSHLESS6_MAP_MIKROBUS( cfg, MIKROBUS_1 );
brushless6_init( &brushless6, &cfg );
}

Application Task

This function drives the motor in both directions increasing and decreasing the speed of the motor.

void application_task ( void )
{
clockwise( );
counter_clockwise( );
}

NOTE

The maximal PWM Clock frequency for this Click board is 500 Hz. So, the user will need to decrease the MCU's main clock frequency in MCU Settings in order to get up-to 500 Hz PWM clock frequency.

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.Brushless6

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.


BRUSHLESS6_RETVAL
#define BRUSHLESS6_RETVAL
Definition: brushless6.h:77
brushless6_calibration
void brushless6_calibration()
Definition: main.c:39
brushless6_setings
void brushless6_setings()
Definition: main.c:48
BRUSHLESS6_MAP_MIKROBUS
#define BRUSHLESS6_MAP_MIKROBUS(cfg, mikrobus)
Definition: brushless6.h:66
application_task
void application_task(void)
Definition: main.c:129
brushless6_init
BRUSHLESS6_RETVAL brushless6_init(brushless6_t *ctx, brushless6_cfg_t *cfg)
Initialization function.
brushless6_set_duty_cycle
void brushless6_set_duty_cycle(brushless6_t *ctx, float duty_cycle)
Generic sets PWM duty cycle.
application_init
void application_init(void)
Definition: main.c:102
brushless6_t
Click ctx object definition.
Definition: brushless6.h:113
brushless6_pwm_stop
void brushless6_pwm_stop(brushless6_t *ctx)
Stop PWM module.
brushless6_cfg_t
Click configuration structure definition.
Definition: brushless6.h:129
brushless6_pwm_start
void brushless6_pwm_start(brushless6_t *ctx)
Start PWM module.
brushless6_cfg_setup
void brushless6_cfg_setup(brushless6_cfg_t *cfg)
Config Object Initialization function.