Go to the documentation of this file.
38 #include "drv_digital_out.h"
39 #include "drv_digital_in.h"
40 #include "drv_i2c_master.h"
52 #define TEMPHUM11_MAP_MIKROBUS( cfg, mikrobus ) \
53 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
54 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA )
61 #define TEMPHUM11_RETVAL uint8_t
63 #define TEMPHUM11_OK 0x00
64 #define TEMPHUM11_INIT_ERROR 0xFF
71 #define TEMPHUM11_REG_TEMPERATURE 0x00
72 #define TEMPHUM11_REG_HUMIDITY 0x01
73 #define TEMPHUM11_REG_CONFIGURATION 0x02
74 #define TEMPHUM11_REG_SERIAL_ID_0 0xFB
75 #define TEMPHUM11_REG_SERIAL_ID_1 0xFC
76 #define TEMPHUM11_REG_SERIAL_ID_2 0xFD
77 #define TEMPHUM11_REG_MANUFACTURER_ID 0xFE
78 #define TEMPHUM11_REG_DEVICE_ID 0xFF
85 #define TEMPHUM11_NORMAL_OPERATION 0x0000
86 #define TEMPHUM11_SOFTWARE_RESET 0x8000
87 #define TEMPHUM11_HEATER_DISABLED 0x0000
88 #define TEMPHUM11_HEATER_ENABLED 0x2000
89 #define TEMPHUM11_TEMP_HUM_ACQUIRED 0x0000
90 #define TEMPHUM11_TEMP_FIRST 0x1000
91 #define TEMPHUM11_BAT_VOLT_BIGGER_THAN_2p8 0x0000
92 #define TEMPHUM11_BAT_VOLT_SMALLER_THAN_2p8 0x0800
93 #define TEMPHUM11_TEMP_RESOLUTION_14bit 0x0000
94 #define TEMPHUM11_TEMP_RESOLUTION_11bit 0x0400
95 #define TEMPHUM11_HUM_RESOLUTION_14bit 0x0000
96 #define TEMPHUM11_HUM_RESOLUTION_11bit 0x0100
97 #define TEMPHUM11_HUM_RESOLUTION_8bit 0x0200
104 #define TEMPHUM11_DEVICE_SLAVE_ADDR 0x40
111 #define TEMPHUM11_DEVICE_ID 0x1050
112 #define TEMPHUM11_MANUFACTURER_ID 0x5449
119 #define TEMPHUM11_TEMP_IN_CELSIUS 0x00
120 #define TEMPHUM11_TEMP_IN_KELVIN 0x01
121 #define TEMPHUM11_TEMP_IN_FAHRENHEIT 0x02
250 #endif // _TEMPHUM11_H_
TEMPHUM11_RETVAL temphum11_init(temphum11_t *ctx, temphum11_cfg_t *cfg)
Initialization function.
Click configuration structure definition.
Definition: temphum11.h:148
void temphum11_write_config(temphum11_t *ctx, uint16_t config)
Function for writing configuration device for measurement.
void temphum11_default_cfg(temphum11_t *ctx)
Click Default Configuration function.
uint32_t i2c_speed
Definition: temphum11.h:157
uint8_t i2c_address
Definition: temphum11.h:158
i2c_master_t i2c
Definition: temphum11.h:137
#define TEMPHUM11_RETVAL
Definition: temphum11.h:61
uint8_t slave_address
Definition: temphum11.h:141
pin_name_t sda
Definition: temphum11.h:153
void temphum11_cfg_setup(temphum11_cfg_t *cfg)
Config Object Initialization function.
pin_name_t scl
Definition: temphum11.h:152
Click ctx object definition.
Definition: temphum11.h:133
float temphum11_get_humidity(temphum11_t *ctx)
Functions for reading Relative Huminidy data.
float temphum11_get_temperature(temphum11_t *ctx, uint8_t temp_in)
Functions for reading Temperature data.
uint16_t temphum11_read_data(temphum11_t *ctx, uint8_t reg)
Functions for reading data from registers.