38 #include "drv_digital_out.h" 39 #include "drv_digital_in.h" 40 #include "drv_i2c_master.h" 52 #define TEMPHUM3_MAP_MIKROBUS( cfg, mikrobus ) \ 53 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \ 54 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \ 55 cfg.cs = MIKROBUS( mikrobus, MIKROBUS_CS ); \ 56 cfg.int_pin = MIKROBUS( mikrobus, MIKROBUS_INT ) 63 #define TEMPHUM3_RETVAL uint8_t 65 #define TEMPHUM3_OK 0x00 66 #define TEMPHUM3_INIT_ERROR 0xFF 73 #define TEMPHUM3_MODE_ACTIVE 0x01 74 #define TEMPHUM3_MODE_SLEEP 0x00 81 #define TEMPHUM3_REG_TEMPERATURE 0x00 82 #define TEMPHUM3_REG_HUMIDITY 0x02 83 #define TEMPHUM3_REG_INTERRUPT_DRDY 0x04 84 #define TEMPHUM3_REG_TEMPERATURE_MAX 0x05 85 #define TEMPHUM3_REG_HUMIDITY_MAX 0x06 86 #define TEMPHUM3_REG_INTERRUPT_MASK 0x07 87 #define TEMPHUM3_REG_TEMP_OFFSET_ADJUST 0x08 88 #define TEMPHUM3_REG_HUM_OFFSET_ADJUST 0x09 89 #define TEMPHUM3_REG_TEMP_THRESHOLD_HIGH 0x0A 90 #define TEMPHUM3_REG_HUM_THRESHOLD_HIGH 0x0C 91 #define TEMPHUM3_REG_TEMP_THRESHOLD_LOW 0x0B 92 #define TEMPHUM3_REG_HUM_THRESHOLD_LOW 0x0D 93 #define TEMPHUM3_REG_RST_DRDY_INT_CONF 0x0E 94 #define TEMPHUM3_REG_MEASUREMENT_CONF 0x0F 95 #define TEMPHUM3_REG_MANUFACTURER_ID 0xFC 96 #define TEMPHUM3_REG_DEVICE_ID 0xFE 103 #define TEMPHUM3_STATUS_DRDY 0x80 104 #define TEMPHUM3_STATUS_TEMP_HIGH 0x40 105 #define TEMPHUM3_STATUS_TEMP_LOW 0x20 106 #define TEMPHUM3_STATUS_HUM_HIGH 0x10 107 #define TEMPHUM3_STATUS_HUM_LOW 0x08 114 #define TEMPHUM3_MASK_DRDY 0x80 115 #define TEMPHUM3_MASK_TEMP_HIGH 0x40 116 #define TEMPHUM3_MASK_TEMP_LOW 0x20 117 #define TEMPHUM3_MASK_HUM_HIGH 0x10 118 #define TEMPHUM3_MASK_HUM_LOW 0x08 126 #define TEMPHUM3_CONF_NORMAL_MODE 0x00 << 7 127 #define TEMPHUM3_CONF_SOFT_RESET 0x01 << 7 134 #define TEMPHUM3_CONF_ODR_NO_REPEATED 0x00 << 4 135 #define TEMPHUM3_CONF_ODR_REPEATED_2MIN 0x01 << 4 136 #define TEMPHUM3_CONF_ODR_REPEATED_1MIN 0x02 << 4 137 #define TEMPHUM3_CONF_ODR_REPEATED_10SEC 0x03 << 4 138 #define TEMPHUM3_CONF_ODR_REPEATED_5SEC 0x04 << 4 139 #define TEMPHUM3_CONF_ODR_REPEATED_1SEC 0x05 << 4 140 #define TEMPHUM3_CONF_ODR_REPEATED_500MS 0x06 << 4 141 #define TEMPHUM3_CONF_ODR_REPEATED_200MS 0x07 << 4 142 #define TEMPHUM3_CONF_HEATER_OFF 0x00 << 3 143 #define TEMPHUM3_CONF_HEATER_ON 0x01 << 3 144 #define TEMPHUM3_CONF_INT_DRDY_HIGH_Z 0x00 << 2 145 #define TEMPHUM3_CONF_INT_DRDY_ENABLE 0x01 << 2 146 #define TEMPHUM3_CONF_INT_POL_LOW 0x00 << 1 147 #define TEMPHUM3_CONF_INT_POL_HIGH 0x01 << 1 148 #define TEMPHUM3_CONF_INT_MODE_SENSITIVE 0x00 149 #define TEMPHUM3_CONF_INT_MODE_COMPARATOR 0x01 156 #define TEMPHUM3_MCONF_TEMP_RES_14BIT 0x00 << 6 157 #define TEMPHUM3_MCONF_TEMP_RES_11BIT 0x01 << 6 158 #define TEMPHUM3_MCONF_TEMP_RES_9BIT 0x02 << 6 159 #define TEMPHUM3_MCONF_HUM_RES_14BIT 0x00 << 5 160 #define TEMPHUM3_MCONF_HUM_RES_11BIT 0x01 << 5 161 #define TEMPHUM3_MCONF_HUM_RES_9BIT 0x02 << 5 162 #define TEMPHUM3_MCONF_HUM_TEMP 0x00 << 1 163 #define TEMPHUM3_MCONF_TEMP_ONLY 0x01 << 1 164 #define TEMPHUM3_MCONF_HUM_ONLY 0x02 << 1 165 #define TEMPHUM3_MCONF_MEAS_START 0x01 166 #define TEMPHUM3_MCONF_MEAS_NO_ACTION 0x00 442 #endif // _TEMPHUM3_H_ pin_name_t sda
Definition: temphum3.h:207
void temphum3_generic_write(temphum3_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic write function.
#define TEMPHUM3_RETVAL
Definition: temphum3.h:63
uint8_t i2c_address
Definition: temphum3.h:217
i2c_master_t i2c
Definition: temphum3.h:191
pin_name_t int_pin
Definition: temphum3.h:212
digital_in_t int_pin
Definition: temphum3.h:187
void temphum3_set_mode(temphum3_t *ctx, uint8_t value)
Set measurement mode function.
uint16_t temphum3_get_id(temphum3_t *ctx)
Get ID function.
void temphum3_generic_read(temphum3_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic read function.
float temphum3_get_max_temp(temphum3_t *ctx)
Get maximum temperature function.
void temphum3_set_measurement(temphum3_t *ctx, uint8_t value)
Set measurement function.
uint8_t temphum3_get_interrupt_mask(temphum3_t *ctx, uint8_t mask)
Get interrupt mask function.
void temphum3_set_high_temp(temphum3_t *ctx, uint8_t temp_data)
Set high temperature function.
TEMPHUM3_RETVAL temphum3_init(temphum3_t *ctx, temphum3_cfg_t *cfg)
Initialization function.
float temphum3_get_max_hum(temphum3_t *ctx)
Get maximum humidity function.
pin_name_t scl
Definition: temphum3.h:206
void temphum3_set_low_temp(temphum3_t *ctx, uint8_t temp_data)
Set low temperature function.
float temphum3_get_humidity(temphum3_t *ctx)
Get humidity function.
void temphum3_cfg_setup(temphum3_cfg_t *cfg)
Config Object Initialization function.
void temphum3_set_high_hum(temphum3_t *ctx, uint8_t hum_data)
Set high humidity function.
Click ctx object definition.
Definition: temphum3.h:179
pin_name_t cs
Definition: temphum3.h:211
void temphum3_set_offset(temphum3_t *ctx, uint8_t reg, uint8_t value)
Set offset function.
void temphum3_set_low_hum(temphum3_t *ctx, uint8_t hum_data)
Set low humidity function.
digital_out_t cs
Definition: temphum3.h:183
uint8_t slave_address
Definition: temphum3.h:195
Click configuration structure definition.
Definition: temphum3.h:202
void temphum3_set_configuration(temphum3_t *ctx, uint8_t value)
Set configuration function.
void temphum3_default_cfg(temphum3_t *ctx)
Click Default Configuration function.
uint16_t temphum3_get_manufacturer_id(temphum3_t *ctx)
Get manufacturer's ID function.
float temphum3_get_temperature(temphum3_t *ctx)
Get temperature function.
uint32_t i2c_speed
Definition: temphum3.h:216
uint8_t temphum3_get_status_interrupt(temphum3_t *ctx, uint8_t mask)
Get interrupt status function.