Go to the documentation of this file.
38 #include "mikrosdk_version.h"
41 #if mikroSDK_GET_VERSION < 20800ul
42 #include "rcu_delays.h"
48 #include "drv_digital_out.h"
49 #include "drv_digital_in.h"
50 #include "drv_i2c_master.h"
63 #define TEMPHUM6_MAP_MIKROBUS( cfg, mikrobus ) \
64 cfg.scl= MIKROBUS( mikrobus, MIKROBUS_SCL ); \
65 cfg.sda= MIKROBUS( mikrobus, MIKROBUS_SDA )
72 #define TEMPHUM6_RETVAL uint8_t
74 #define TEMPHUM6_OK 0x00
75 #define TEMPHUM6_INIT_ERROR 0xFF
82 #define TEMPHUM6_PART_ID 0x0210
83 #define TEMPHUM6_DEVICE_SLAVE_ADDRESS 0x43
90 #define TEMPHUM6_REG_PART_ID 0x00
91 #define TEMPHUM6_REG_UNIQUE_IDENTIFIER 0x04
92 #define TEMPHUM6_REG_SYSTEM_CONTROL 0x10
93 #define TEMPHUM6_REG_SYSTEM_STATUS 0x11
94 #define TEMPHUM6_REG_SENS_RUN 0x21
95 #define TEMPHUM6_REG_SENS_START 0x22
96 #define TEMPHUM6_REG_SENS_STOP 0x23
97 #define TEMPHUM6_REG_SENS_STATUS 0x24
98 #define TEMPHUM6_REG_TEMPERATURE 0x30
99 #define TEMPHUM6_REG_RELATIVE_HUMIDITY 0x33
106 #define TEMPHUM6_STATUS_I2C_ERROR 4
107 #define TEMPHUM6_STATUS_CRC_ERROR 3
108 #define TEMPHUM6_STATUS_INVALID 2
109 #define TEMPHUM6_STATUS_OK 1
116 #define TEMPHUM6_TEMP_IN_FAHRENHEIT 2
117 #define TEMPHUM6_TEMP_IN_KELVIN 1
118 #define TEMPHUM6_TEMP_IN_CELSIUS 0
125 #define TEMPHUM6_LOW_POWER_DISABLE 0x00
126 #define TEMPHUM6_LOW_POWER_ENABLE 0x01
133 #define TEMPHUM6_SYSTEM_IS_IN_STANDBY_OR_BOOTING_STATE 0
134 #define TEMPHUM6_SYSTEM_IS_IN_ACTIVE_STATE 1
141 #define TEMPHUM6_HUM_RUN_SINGLE_SHOT_MODE 0x00
142 #define TEMPHUM6_TEMP_RUN_SINGLE_SHOT_MODE 0x00
143 #define TEMPHUM6_HUM_RUN_CONTINUOUS_MODE 0x02
144 #define TEMPHUM6_TEMP_RUN_CONTINUOUS_MODE 0x01
151 #define TEMPHUM6_HUM_START_MEASUREMENT 0x02
152 #define TEMPHUM6_TEMP_START_MEASUREMENT 0x01
153 #define TEMPHUM6_DISABLE_MEASUREMENT 0x00
160 #define TEMPHUM6_HUM_STOP_CONTINUOUS_MEASUREMENT 0x02
161 #define TEMPHUM6_TEMP_STOP_CONTINUOUS_MEASUREMENT 0x01
162 #define TEMPHUM6_DISABLE_CONTINUOUS_MEASUREMENT 0x00
321 #endif // _TEMPHUM6_H_
uint8_t slave_address
Definition: temphum6.h:185
uint16_t temphum6_get_part_id(temphum6_t *ctx)
Functions for get device PART ID.
i2c_master_t i2c
Definition: temphum6.h:181
TEMPHUM6_RETVAL temphum6_init(temphum6_t *ctx, temphum6_cfg_t *cfg)
Initialization function.
void temphum6_generic_write(temphum6_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic write function.
void temphum6_run(temphum6_t *ctx)
Functions for RUN measurement.
#define TEMPHUM6_RETVAL
Definition: temphum6.h:72
float temphum6_read_temperature(temphum6_t *ctx, uint8_t temp_in)
Functions for read Temperature data.
Click ctx object definition.
Definition: temphum6.h:178
void temphum6_generic_read(temphum6_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic read function.
float temphum6_read_relative_huminidy(temphum6_t *ctx)
Functions for read Relative Huminidy data.
Click configuration structure definition.
Definition: temphum6.h:193
pin_name_t scl
Definition: temphum6.h:196
uint8_t i2c_address
Definition: temphum6.h:202
uint32_t i2c_speed
Definition: temphum6.h:201
void temphum6_cfg_setup(temphum6_cfg_t *cfg)
Config Object Initialization function.
pin_name_t sda
Definition: temphum6.h:197
void temphum6_reset(temphum6_t *ctx)
Functions for reset device.