Go to the documentation of this file.
42 #ifdef PREINIT_SUPPORTED
46 #ifdef MikroCCoreVersion
47 #if MikroCCoreVersion >= 1
52 #include "drv_digital_out.h"
53 #include "drv_digital_in.h"
54 #include "drv_i2c_master.h"
67 #define THERMO11_MAP_MIKROBUS( cfg, mikrobus ) \
68 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
69 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \
70 cfg.int_pin = MIKROBUS( mikrobus, MIKROBUS_INT );
77 #define THERMO11_RETVAL uint8_t
79 #define THERMO11_OK 0x00
80 #define THERMO11_INIT_ERROR 0xFF
87 #define THERMO11_DEV_ADDR 0x48
94 #define THERMO11_TEMPERATURE_REG 0x00
95 #define THERMO11_CONFIG_REG 0x01
96 #define THERMO11_HIGH_LIMIT_REG 0x02
97 #define THERMO11_LOW_LIMIT_REG 0x03
98 #define THERMO11_EEPROM_UNLOCK_REG 0x04
99 #define THERMO11_EEPROM1_REG 0x05
100 #define THERMO11_EEPROM2_REG 0x06
101 #define THERMO11_TEMP_OFFSET_REG 0x07
102 #define THERMO11_EEPROM3_REG 0x08
103 #define THERMO11_DEV_ID_REG 0x0F
110 #define THERMO11_CONTINUOUS_CONV_MODE 0x0000
111 #define THERMO11_SHUTDOWN_MODE 0x0400
112 #define THERMO11_ONESHOT_CONV_MODE 0x0C00
113 #define THERMO11_CONV_TIME_0 0x0000
114 #define THERMO11_CONV_TIME_1 0x0080
115 #define THERMO11_CONV_TIME_2 0x0100
116 #define THERMO11_CONV_TIME_3 0x0180
117 #define THERMO11_CONV_TIME_4 0x0200
118 #define THERMO11_CONV_TIME_5 0x0280
119 #define THERMO11_CONV_TIME_6 0x0300
120 #define THERMO11_CONV_TIME_7 0x0380
121 #define THERMO11_NO_AVRG 0x0000
122 #define THERMO11_8_AVRG_CONV 0x0020
123 #define THERMO11_32_AVRG_CONV 0x0040
124 #define THERMO11_64_AVRG_CONV 0x0060
125 #define THERMO11_THERM_MODE 0x0010
126 #define THERMO11_ALERT_MODE 0x0000
127 #define THERMO11_INT_PIN_ACT_HIGH 0x0008
128 #define THERMO11_INT_PIN_ACT_LOW 0x0000
129 #define THERMO11_INT_PIN_DRDY_FLAG 0x0004
130 #define THERMO11_INT_PIN_ALERT_FLAGS 0x0000
131 #define THERMO11_SW_RESET_CMD 0x0002
138 #define THERMO11_EEPROM_LOCK 0x0000
139 #define THERMO11_EEPROM_UNLOCK 0x8000
140 #define THERMO11_EEPROM_BUSY_FLAG 0x4000
147 #define THERMO11_DEV_ID_MASK 0x0FFF
148 #define THERMO11_REVISION_MASK 0xF000
155 #define THERMO11_DRDY_FLAG 0x01
156 #define THERMO11_LOW_ALERT_FLAG 0x02
157 #define THERMO11_HIGH_ALERT_FLAG 0x04
158 #define THERMO11_FLAG_IS_CLEARED 0x00
165 #define THERMO11_INVALID_TEMP_RANGE 0x02
166 #define THERMO11_INVALID_ADDR 0x01
167 #define THERMO11_OK 0x00
412 #endif // _THERMO11_H_
THERMO11_RETVAL thermo11_write_reg(thermo11_t *ctx, uint8_t reg_addr, uint16_t data_in)
Repeated Write function.
void thermo11_generic_write(thermo11_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic write function.
void thermo11_generic_read(thermo11_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic read function.
i2c_master_t i2c
Definition: thermo11.h:188
void thermo11_default_cfg(thermo11_t *ctx)
Click Default Configuration function.
THERMO11_RETVAL thermo11_program_eeprom(thermo11_t *ctx, uint8_t eeprom_addr, uint16_t eeprom_data)
EEPROM Program function.
void thermo11_sw_reset(thermo11_t *ctx)
Software Reset Command.
#define THERMO11_RETVAL
Definition: thermo11.h:77
THERMO11_RETVAL thermo11_read_reg(thermo11_t *ctx, uint8_t reg_addr, uint16_t *data_out)
Repeated Read function.
float thermo11_get_temp(thermo11_t *ctx, uint8_t temp_addr)
Temperature Get function.
uint8_t slave_address
Definition: thermo11.h:192
void thermo11_general_call_reset_cmd(thermo11_t *ctx)
General Call Reset Command.
Click configuration structure definition.
Definition: thermo11.h:200
Click ctx object definition.
Definition: thermo11.h:181
pin_name_t sda
Definition: thermo11.h:204
void thermo11_cfg_setup(thermo11_cfg_t *cfg)
Config Object Initialization function.
pin_name_t int_pin
Definition: thermo11.h:208
digital_in_t int_pin
Definition: thermo11.h:184
THERMO11_RETVAL thermo11_check_status(thermo11_t *ctx)
Status Check function.
pin_name_t scl
Definition: thermo11.h:203
THERMO11_RETVAL thermo11_set_temp(thermo11_t *ctx, uint8_t temp_addr, float temp_value)
Temperature Set function.
uint32_t i2c_speed
Definition: thermo11.h:212
uint8_t i2c_address
Definition: thermo11.h:213
THERMO11_RETVAL thermo11_init(thermo11_t *ctx, thermo11_cfg_t *cfg)
Initialization function.
THERMO11_RETVAL thermo11_get_int(thermo11_t *ctx)
INT Pin Check function.
uint8_t thermo11_sm_bus_alert_cmd(thermo11_t *ctx)
SMBus Alert Command.