thermo13
2.0.0.0
|
Thermo 13 Click is a Click board™ equipped with the sensor IC, which can digitize temperature measurements between -30°C and +95°C so that the temperature measurement data can be processed by the host MCU.
We provide a library for the Thermo13 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for Thermo13 Click driver.
void thermo13_cfg_setup ( thermo13_cfg_t *cfg );
THERMO13_RETVAL thermo13_init ( thermo13_t *ctx, thermo13_cfg_t *cfg );
void thermo13_default_cfg ( thermo13_t *ctx );
void thermo13_set_temp_limit ( thermo13_t *ctx, uint8_t temp_reg, float temp );
float thermo13_get_temp_limit ( thermo13_t *ctx, uint8_t temp_reg );
float thermo13_get_ambient_temperature_data ( thermo13_t *ctx, uint8_t temp_in );
The application measures temperature
The demo application is composed of two sections :
>Initializes the driver init, configures the module and reads the temperature Limit LOW/HIGH values that are set.
>Reads ambient temperature data and this data logs to USBUART every 1500ms.
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.