Go to the documentation of this file.
42 #ifdef PREINIT_SUPPORTED
46 #ifdef MikroCCoreVersion
47 #if MikroCCoreVersion >= 1
52 #include "drv_digital_out.h"
53 #include "drv_digital_in.h"
54 #include "drv_i2c_master.h"
67 #define THERMO13_MAP_MIKROBUS( cfg, mikrobus ) \
68 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
69 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \
70 cfg.int_pin = MIKROBUS( mikrobus, MIKROBUS_INT );
77 #define THERMO13_RETVAL uint8_t
79 #define THERMO13_OK 0x00
80 #define THERMO13_INIT_ERROR 0xFF
87 #define THERMO13_DEVICE_SLAVE_ADDR_000 0x48
88 #define THERMO13_DEVICE_SLAVE_ADDR_001 0x49
89 #define THERMO13_DEVICE_SLAVE_ADDR_010 0x4A
90 #define THERMO13_DEVICE_SLAVE_ADDR_011 0x4B
91 #define THERMO13_DEVICE_SLAVE_ADDR_100 0x4C
92 #define THERMO13_DEVICE_SLAVE_ADDR_101 0x4D
93 #define THERMO13_DEVICE_SLAVE_ADDR_110 0x4E
94 #define THERMO13_DEVICE_SLAVE_ADDR_111 0x4F
101 #define THERMO13_REG_TEMPERATURE 0x00
102 #define THERMO13_REG_CONFIGURATION 0x01
103 #define THERMO13_REG_TEMPERATURE_LIMIT_LOW 0x02
104 #define THERMO13_REG_TEMPERATURE_LIMIT_HIGH 0x03
105 #define THERMO13_REG_SOFTWARE_RESET 0x04
112 #define THERMO13_TEMP_IN_CELSIUS 0x00
113 #define THERMO13_TEMP_IN_KELVIN 0x01
114 #define THERMO13_TEMP_IN_FAHRENHEIT 0x02
121 #define THERMO13_DEF_TEMP_LIMIT_LOW 75
122 #define THERMO13_DEF_TEMP_LIMIT_HIGH 80
129 #define THERMO13_CFG_CONTINUOUS_MEASUREMENT 0x0000
130 #define THERMO13_CFG_SINGLE_MEASUREMENT 0x8000
131 #define THERMO13_CFG_INTERRUPT_IS_NOT_ACTIVE 0x0000
132 #define THERMO13_CFG_INTERRUPT_IS_ACTIVE 0x4000
133 #define THERMO13_CFG_FAULT_QUEUE_1 0x0000
134 #define THERMO13_CFG_FAULT_QUEUE_2 0x0800
135 #define THERMO13_CFG_FAULT_QUEUE_4 0x1000
136 #define THERMO13_CFG_FAULT_QUEUE_6 0x1800
137 #define THERMO13_CFG_ALERT_ACTIVE_LOW 0x0000
138 #define THERMO13_CFG_ALERT_ACTIVE_HIGH 0x0400
139 #define THERMO13_CFG_NO_SHUTDOWN 0x0000
140 #define THERMO13_CFG_SHUTDOWN_ACTIVE 0x0100
141 #define THERMO13_CFG_WAIT_TIME_X16 0x0000
142 #define THERMO13_CFG_WAIT_TIME_X4 0x0001
143 #define THERMO13_CFG_WAIT_TIME_X1 0x0002
144 #define THERMO13_CFG_WAIT_TIME_X0p5 0x0003
333 #endif // THERMO13_H_
pin_name_t scl
Definition: thermo13.h:180
struct thermo13_s thermo13_t
Click ctx object definition.
uint8_t thermo13_get_interrupt_state(thermo13_t *ctx)
Interrupt state.
uint8_t slave_address
Definition: thermo13.h:169
void thermo13_cfg_setup(thermo13_cfg_t *cfg)
Config Object Initialization function.
float thermo13_get_temp_limit(thermo13_t *ctx, uint8_t temp_reg)
Get temperature register.
void thermo13_configuration(thermo13_t *ctx, uint16_t cfg_data)
Configuration register.
void thermo13_set_temp_limit(thermo13_t *ctx, uint8_t temp_reg, float temp)
Set temperature limit register.
pin_name_t int_pin
Definition: thermo13.h:185
void thermo13_software_reset(thermo13_t *ctx)
Software reset.
Click ctx object definition.
Definition: thermo13.h:158
void thermo13_default_cfg(thermo13_t *ctx)
Click Default Configuration function.
Click configuration structure definition.
Definition: thermo13.h:177
uint32_t i2c_speed
Definition: thermo13.h:189
digital_out_t int_pin
Definition: thermo13.h:161
#define THERMO13_RETVAL
Definition: thermo13.h:77
uint8_t i2c_address
Definition: thermo13.h:190
uint16_t thermo13_read_data(thermo13_t *ctx, uint8_t reg_addr)
Functions for read data from registers.
THERMO13_RETVAL thermo13_init(thermo13_t *ctx, thermo13_cfg_t *cfg)
Initialization function.
float thermo13_get_ambient_temperature_data(thermo13_t *ctx, uint8_t temp_in)
Ambient temperature data.
pin_name_t sda
Definition: thermo13.h:181
void thermo13_generic_read(thermo13_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic read function.
void thermo13_generic_write(thermo13_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic write function.
i2c_master_t i2c
Definition: thermo13.h:165