thermo13  2.0.0.0
Main Page

Thermo 13 Click

Thermo 13 Click is a Click board™ equipped with the sensor IC, which can digitize temperature measurements between -30°C and +95°C so that the temperature measurement data can be processed by the host MCU.

Click Product page


Click library

  • Author : MikroE Team
  • Date : Dec 2019.
  • Type : I2C type

Software Support

We provide a library for the Thermo13 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Thermo13 Click driver.

Standard key functions :

  • Config Object Initialization function.

    void thermo13_cfg_setup ( thermo13_cfg_t *cfg );

  • Initialization function.

    THERMO13_RETVAL thermo13_init ( thermo13_t *ctx, thermo13_cfg_t *cfg );

  • Click Default Configuration function.

    void thermo13_default_cfg ( thermo13_t *ctx );

Example key functions :

  • Set temperature limit register

    void thermo13_set_temp_limit ( thermo13_t *ctx, uint8_t temp_reg, float temp );

  • Get temperature register

    float thermo13_get_temp_limit ( thermo13_t *ctx, uint8_t temp_reg );

  • Ambient temperature data

    float thermo13_get_ambient_temperature_data ( thermo13_t *ctx, uint8_t temp_in );

Examples Description

The application measures temperature

The demo application is composed of two sections :

Application Init

>Initializes the driver init, configures the module and reads the temperature Limit LOW/HIGH values that are set.

void application_init ( void )
{
log_cfg_t log_cfg;
float temp_limit_low;
float temp_limit_high;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization
THERMO13_MAP_MIKROBUS( cfg, MIKROBUS_1 );
thermo13_init( &thermo13, &cfg );
// Configuration
// Temperature Register
log_printf( &logger, " --- Temperature register data --- \r\n \r\n" );
log_printf( &logger, " --- Temp - Limit LOW : %.2f C \r\n ", temp_limit_low );
log_printf( &logger, " --- Temp - Limit HIGH : %.2f C \r\n \r\n ", temp_limit_high );
log_printf( &logger, " --- Ambient temperature measurement --- \r\n " );
}
}

Application Task

>Reads ambient temperature data and this data logs to USBUART every 1500ms.

void application_task ( void )
{
float temperature;
log_printf( &logger, "** temperature %.2f ** \r\n" );
log_printf( &logger, " ----------------------------\r\n" );
Delay_ms ( 1000 );
Delay_ms ( 500 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.Thermo13

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.


THERMO13_REG_TEMPERATURE_LIMIT_HIGH
#define THERMO13_REG_TEMPERATURE_LIMIT_HIGH
Definition: thermo13.h:104
THERMO13_CFG_INTERRUPT_IS_ACTIVE
#define THERMO13_CFG_INTERRUPT_IS_ACTIVE
Definition: thermo13.h:132
THERMO13_CFG_ALERT_ACTIVE_HIGH
#define THERMO13_CFG_ALERT_ACTIVE_HIGH
Definition: thermo13.h:138
THERMO13_CFG_WAIT_TIME_X16
#define THERMO13_CFG_WAIT_TIME_X16
Definition: thermo13.h:141
THERMO13_TEMP_IN_CELSIUS
#define THERMO13_TEMP_IN_CELSIUS
Definition: thermo13.h:112
thermo13_cfg_setup
void thermo13_cfg_setup(thermo13_cfg_t *cfg)
Config Object Initialization function.
THERMO13_CFG_FAULT_QUEUE_1
#define THERMO13_CFG_FAULT_QUEUE_1
Definition: thermo13.h:133
application_task
void application_task(void)
Definition: main.c:83
thermo13_get_temp_limit
float thermo13_get_temp_limit(thermo13_t *ctx, uint8_t temp_reg)
Get temperature register.
thermo13_configuration
void thermo13_configuration(thermo13_t *ctx, uint16_t cfg_data)
Configuration register.
THERMO13_REG_TEMPERATURE_LIMIT_LOW
#define THERMO13_REG_TEMPERATURE_LIMIT_LOW
Definition: thermo13.h:103
THERMO13_MAP_MIKROBUS
#define THERMO13_MAP_MIKROBUS(cfg, mikrobus)
Definition: thermo13.h:67
thermo13_cfg_t
Click configuration structure definition.
Definition: thermo13.h:177
application_init
void application_init(void)
Definition: main.c:33
thermo13_init
THERMO13_RETVAL thermo13_init(thermo13_t *ctx, thermo13_cfg_t *cfg)
Initialization function.
thermo13_get_ambient_temperature_data
float thermo13_get_ambient_temperature_data(thermo13_t *ctx, uint8_t temp_in)
Ambient temperature data.
THERMO13_CFG_CONTINUOUS_MEASUREMENT
#define THERMO13_CFG_CONTINUOUS_MEASUREMENT
Definition: thermo13.h:129