Go to the documentation of this file.
38 #include "mikrosdk_version.h"
41 #if mikroSDK_GET_VERSION < 20800ul
42 #include "rcu_delays.h"
48 #include "drv_digital_out.h"
49 #include "drv_digital_in.h"
50 #include "drv_i2c_master.h"
62 #define THERMO3_MAP_MIKROBUS( cfg, mikrobus ) \
63 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
64 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \
65 cfg. al = MIKROBUS( mikrobus, MIKROBUS_INT )
72 #define THERMO3_RETVAL uint8_t
74 #define THERMO3_OK 0x00
75 #define THERMO3_INIT_ERROR 0xFF
82 #define TMP102_I2C_ADDR 0x48 // TMP102 I2C address (ADD0 pin is connected to ground)
211 #endif // _THERMO3_H_
pin_name_t sda
Definition: thermo3.h:121
pin_name_t al
Definition: thermo3.h:125
void thermo3_cfg_setup(thermo3_cfg_t *cfg)
Config Object Initialization function.
i2c_master_t i2c
Definition: thermo3.h:105
digital_in_t al
Definition: thermo3.h:101
uint8_t slave_address
Definition: thermo3.h:109
void thermo3_default_cfg(thermo3_t *ctx)
Click Default Configuration function.
void thermo3_generic_read(thermo3_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic read function.
Click configuration structure definition.
Definition: thermo3.h:117
Click ctx object definition.
Definition: thermo3.h:98
THERMO3_RETVAL thermo3_init(thermo3_t *ctx, thermo3_cfg_t *cfg)
Initialization function.
void thermo3_generic_write(thermo3_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic write function.
#define THERMO3_RETVAL
Definition: thermo3.h:72
uint8_t i2c_address
Definition: thermo3.h:130
pin_name_t scl
Definition: thermo3.h:120
uint32_t i2c_speed
Definition: thermo3.h:129
float get_temperature(thermo3_t *ctx)
Gets temperature.