Go to the documentation of this file.
38 #include "drv_digital_out.h"
39 #include "drv_digital_in.h"
40 #include "drv_i2c_master.h"
52 #define THERMO7_MAP_MIKROBUS( cfg, mikrobus ) \
53 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
54 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \
55 cfg.int_pin = MIKROBUS( mikrobus, MIKROBUS_INT )
62 #define THERMO7_RETVAL uint8_t
64 #define THERMO7_OK 0x00
65 #define THERMO7_INIT_ERROR 0xFF
72 #define THERMO7_REG_AMBIENT_TEMPERATURE 0x00
73 #define THERMO7_REG_CONFIGURATION 0x01
74 #define THERMO7_REG_HYSTERESIS_TEMPERATURE 0x02
75 #define THERMO7_REG_TEMPERATURE_LIMIT_SET 0x03
82 #define THERMO7_CONFIG_ONE_SHOT_ENABLE (0x01 << 7)
83 #define THERMO7_CONFIG_ONE_SHOT_DISABLE (0x00 << 7)
84 #define THERMO7_CONFIG_ADC_RESOLUTION_9bit (0x00 << 5)
85 #define THERMO7_CONFIG_ADC_RESOLUTION_10bit (0x01 << 5)
86 #define THERMO7_CONFIG_ADC_RESOLUTION_11bit (0x02 << 5)
87 #define THERMO7_CONFIG_ADC_RESOLUTION_12bit (0x03 << 5)
88 #define THERMO7_CONFIG_FAULT_QUEUE_MODE_1 (0x00 << 3)
89 #define THERMO7_CONFIG_FAULT_QUEUE_MODE_2 (0x01 << 3)
90 #define THERMO7_CONFIG_FAULT_QUEUE_MODE_4 (0x02 << 3)
91 #define THERMO7_CONFIG_FAULT_QUEUE_MODE_6 (0x03 << 3)
92 #define THERMO7_CONFIG_ALERT_POLARITY_ACTIVE_HIGH (0x01 << 2)
93 #define THERMO7_CONFIG_ALERT_POLARITY_ACTIVE_LOW (0x00 << 2)
94 #define THERMO7_CONFIG_COMPARATOR_MODE (0x00 << 1)
95 #define THERMO7_CONFIG_INTERRUPT_MODE (0x01 << 1)
96 #define THERMO7_CONFIG_SHUTDOWN_ENABLE 0x01
97 #define THERMO7_CONFIG_SHUTDOWN_DISABLE 0x00
305 #endif // _THERMO7_H_
void thermo7_set_configuration(thermo7_t *ctx, uint8_t configuration)
Functions for configuration chip and measurement.
uint8_t slave_address
Definition: thermo7.h:122
#define THERMO7_RETVAL
Definition: thermo7.h:62
void thermo7_generic_write(thermo7_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic write function.
void thermo7_generic_read(thermo7_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic read function.
void thermo7_set_hysteresis_temperature(thermo7_t *ctx, int8_t temperature)
Functions for settings Hysteresis Temperature.
Click configuration structure definition.
Definition: thermo7.h:130
i2c_master_t i2c
Definition: thermo7.h:118
int16_t thermo7_get_limit_temperature(thermo7_t *ctx)
Functions for get Limit Temperature.
Click ctx object definition.
Definition: thermo7.h:111
int16_t thermo7_get_hysteresis_temperature(thermo7_t *ctx)
Functions for reads Hysteresis Temperature.
void thermo7_set_resolution(thermo7_t *ctx, uint8_t resolution)
Functions for settings ADC resolution measurement.
uint8_t i2c_address
Definition: thermo7.h:143
void thermo7_set_limit_temperature(thermo7_t *ctx, int16_t temperature)
Functions for settings limit Temperature.
pin_name_t int_pin
Definition: thermo7.h:138
pin_name_t scl
Definition: thermo7.h:133
float thermo7_read_ambient_temperature(thermo7_t *ctx)
Functions for reads ambient temperature.
uint8_t thermo7_get_interrupt(thermo7_t *ctx)
Functions for reads state of interrupt pins.
void thermo7_cfg_setup(thermo7_cfg_t *cfg)
Config Object Initialization function.
digital_in_t int_pin
Definition: thermo7.h:114
THERMO7_RETVAL thermo7_init(thermo7_t *ctx, thermo7_cfg_t *cfg)
Initialization function.
pin_name_t sda
Definition: thermo7.h:134
uint32_t i2c_speed
Definition: thermo7.h:142