Go to the documentation of this file.
42 #ifdef PREINIT_SUPPORTED
46 #ifdef MikroCCoreVersion
47 #if MikroCCoreVersion >= 1
52 #include "drv_digital_out.h"
53 #include "drv_digital_in.h"
54 #include "drv_i2c_master.h"
66 #define THERMO7_MAP_MIKROBUS( cfg, mikrobus ) \
67 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
68 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \
69 cfg.int_pin = MIKROBUS( mikrobus, MIKROBUS_INT )
76 #define THERMO7_RETVAL uint8_t
78 #define THERMO7_OK 0x00
79 #define THERMO7_INIT_ERROR 0xFF
86 #define THERMO7_REG_AMBIENT_TEMPERATURE 0x00
87 #define THERMO7_REG_CONFIGURATION 0x01
88 #define THERMO7_REG_HYSTERESIS_TEMPERATURE 0x02
89 #define THERMO7_REG_TEMPERATURE_LIMIT_SET 0x03
96 #define THERMO7_CONFIG_ONE_SHOT_ENABLE (0x01 << 7)
97 #define THERMO7_CONFIG_ONE_SHOT_DISABLE (0x00 << 7)
98 #define THERMO7_CONFIG_ADC_RESOLUTION_9bit (0x00 << 5)
99 #define THERMO7_CONFIG_ADC_RESOLUTION_10bit (0x01 << 5)
100 #define THERMO7_CONFIG_ADC_RESOLUTION_11bit (0x02 << 5)
101 #define THERMO7_CONFIG_ADC_RESOLUTION_12bit (0x03 << 5)
102 #define THERMO7_CONFIG_FAULT_QUEUE_MODE_1 (0x00 << 3)
103 #define THERMO7_CONFIG_FAULT_QUEUE_MODE_2 (0x01 << 3)
104 #define THERMO7_CONFIG_FAULT_QUEUE_MODE_4 (0x02 << 3)
105 #define THERMO7_CONFIG_FAULT_QUEUE_MODE_6 (0x03 << 3)
106 #define THERMO7_CONFIG_ALERT_POLARITY_ACTIVE_HIGH (0x01 << 2)
107 #define THERMO7_CONFIG_ALERT_POLARITY_ACTIVE_LOW (0x00 << 2)
108 #define THERMO7_CONFIG_COMPARATOR_MODE (0x00 << 1)
109 #define THERMO7_CONFIG_INTERRUPT_MODE (0x01 << 1)
110 #define THERMO7_CONFIG_SHUTDOWN_ENABLE 0x01
111 #define THERMO7_CONFIG_SHUTDOWN_DISABLE 0x00
319 #endif // _THERMO7_H_
void thermo7_set_configuration(thermo7_t *ctx, uint8_t configuration)
Functions for configuration chip and measurement.
uint8_t slave_address
Definition: thermo7.h:136
#define THERMO7_RETVAL
Definition: thermo7.h:76
void thermo7_generic_write(thermo7_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic write function.
void thermo7_generic_read(thermo7_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic read function.
void thermo7_set_hysteresis_temperature(thermo7_t *ctx, int8_t temperature)
Functions for settings Hysteresis Temperature.
Click configuration structure definition.
Definition: thermo7.h:144
i2c_master_t i2c
Definition: thermo7.h:132
int16_t thermo7_get_limit_temperature(thermo7_t *ctx)
Functions for get Limit Temperature.
Click ctx object definition.
Definition: thermo7.h:125
int16_t thermo7_get_hysteresis_temperature(thermo7_t *ctx)
Functions for reads Hysteresis Temperature.
void thermo7_set_resolution(thermo7_t *ctx, uint8_t resolution)
Functions for settings ADC resolution measurement.
uint8_t i2c_address
Definition: thermo7.h:157
void thermo7_set_limit_temperature(thermo7_t *ctx, int16_t temperature)
Functions for settings limit Temperature.
pin_name_t int_pin
Definition: thermo7.h:152
pin_name_t scl
Definition: thermo7.h:147
float thermo7_read_ambient_temperature(thermo7_t *ctx)
Functions for reads ambient temperature.
uint8_t thermo7_get_interrupt(thermo7_t *ctx)
Functions for reads state of interrupt pins.
void thermo7_cfg_setup(thermo7_cfg_t *cfg)
Config Object Initialization function.
digital_in_t int_pin
Definition: thermo7.h:128
THERMO7_RETVAL thermo7_init(thermo7_t *ctx, thermo7_cfg_t *cfg)
Initialization function.
pin_name_t sda
Definition: thermo7.h:148
uint32_t i2c_speed
Definition: thermo7.h:156