comparator  2.0.0.0
Main Page

Comparator click

Comparator Click represents board equipped with two independent precise voltage comparators.

click Product page


Click library

  • Author : Mihajlo Djordjevic
  • Date : Dec 2019.
  • Type : GPIO type

Software Support

We provide a library for the Comparator Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Comparator Click driver.

Standard key functions :

  • Config Object Initialization function.

    void comparator_cfg_setup ( comparator_cfg_t *cfg );

  • Initialization function.

    COMPARATOR_RETVAL comparator_init ( comparator_t *ctx, comparator_cfg_t *cfg );

  • Click Default Configuration function.

    void comparator_default_cfg ( comparator_t *ctx );

Example key functions :

  • This function check and return state of the o1 ( AN ) pin of Comparator Click Board.

    uint8_t comparator_check_output_one ( comparator_t *ctx );

  • This function check and return state of the o2 ( INT ) pin of Comparator Click Board.

    uint8_t comparator_check_output_two ( comparator_t *ctx );

Examples Description

This is an example which demonstrates the usage of Comparator Click board.

The demo application is composed of two sections :

Application Init

Application Init performs Logger and Click initialization.

void application_init ( void )
{
log_cfg_t log_cfg;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_printf( &logger, "--------------------------\r\n" );
log_printf( &logger, " Application Init\r\n" );
Delay_ms ( 500 );
// Click initialization.
COMPARATOR_MAP_MIKROBUS( cfg, MIKROBUS_1 );
comparator_init( &comparator, &cfg );
log_printf( &logger, "--------------------------\r\n" );
log_printf( &logger, " --- Comparator Click --- \r\n" );
log_printf( &logger, "--------------------------\r\n" );
Delay_ms ( 1000 );
log_printf( &logger, " -- Initialization done --\r\n" );
log_printf( &logger, "--------------------------\r\n" );
Delay_ms ( 1000 );
}

Application Task

Comparator click checks state of the O1 and O2 pins. Results are being sent to the UART Terminal where you can track their changes. All data logs write on USB UART and changes for every 1 sec.

void application_task ( void )
{
log_printf( &logger, " Output One: \r\n" );
{
log_printf( &logger, " High \r\n" );
}
else
{
log_printf( &logger, " Low \r\n" );
}
Delay_ms ( 500 );
log_printf( &logger, " Output Two: \r\n" );
{
log_printf( &logger, " High \r\n" );
}
else
{
log_printf( &logger, " Low \r\n" );
}
Delay_ms ( 500 );
log_printf( &logger, "--------------------------\r\n" );
Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.Comparator

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.


comparator_check_output_two
uint8_t comparator_check_output_two(comparator_t *ctx)
Check state of the o2 pin function.
application_task
void application_task(void)
Definition: main.c:75
comparator_cfg_t
Click configuration structure definition.
Definition: comparator.h:98
out_state_one
uint8_t out_state_one
Definition: main.c:29
comparator_cfg_setup
void comparator_cfg_setup(comparator_cfg_t *cfg)
Config Object Initialization function.
out_state_two
uint8_t out_state_two
Definition: main.c:30
application_init
void application_init(void)
Definition: main.c:39
comparator_init
COMPARATOR_RETVAL comparator_init(comparator_t *ctx, comparator_cfg_t *cfg)
Initialization function.
COMPARATOR_MAP_MIKROBUS
#define COMPARATOR_MAP_MIKROBUS(cfg, mikrobus)
Definition: comparator.h:50
comparator_check_output_one
uint8_t comparator_check_output_one(comparator_t *ctx)
Check state of the o1 pin function.