pressure2
2.0.0.0
|
Pressure 2 click carries MS5803, a high resolution MEMS pressure sensor that is both precise and robust.
We provide a library for the Pressure2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for Pressure2 Click driver.
void pressure2_cfg_setup ( pressure2_cfg_t *cfg );
PRESSURE2_RETVAL pressure2_init ( pressure2_t *ctx, pressure2_cfg_t *cfg );
void pressure2_default_cfg ( pressure2_t *ctx );
uint16_t pressure2_read_coefficient ( pressure2_t *ctx, uint8_t index );
uint32_t pressure2_send_CmdADC ( pressure2_t *ctx, uint8_t cmd );
void pressure2_read_sensor ( pressure2_t *ctx, float *P, float *T );
This application measures pressure in range from 0 to 14 bars (with a resolution of up to 0.2 mbars), but because of the stainless steel cap enclosure, the sensor can withstand up to 30 bars of pressure.
The demo application is composed of two sections :
Initializes driver init and chip init.
Reads sensor and logs to USBUART pressure and temperature every second.
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.