pressure8
2.0.0.0
|
Pressure 8 Click is an accurate and fully calibrated pressure sensor, equipped with the MPR series integrated piezoresistive silicon pressure sensor IC.
We provide a library for the Pressure8 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for Pressure8 Click driver.
void pressure8_cfg_setup ( pressure8_cfg_t *cfg );
PRESSURE8_RETVAL pressure8_init ( pressure8_t *ctx, pressure8_cfg_t *cfg );
float pressure8_get_pressure ( pressure8_t *ctx, uint8_t press_foramt );
uint8_t pressure8_get_device_status ( pressure8_t *ctx );
void pressure8_set_psi_range ( float psi_min, float psi_max );
This application reads pressure data.
The demo application is composed of two sections :
Initialization device and logger module, reset device and set PSI range.
Reads Pressure data and this data logs every 1 sec.
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.