dcmotor3  2.0.0.0
Functions
main.c File Reference

DcMotor3 Click example. More...

#include "board.h"
#include "log.h"
#include "dcmotor3.h"

Functions

void application_init (void)
 
void application_task (void)
 
void main (void)
 

Detailed Description

DcMotor3 Click example.

Description

This click has four operating modes: clockwise, counter-clockwise, short brake and stop. The operating mode is configured through IN1 and IN2 pins.

The demo application is composed of two sections :

Application Init

Initialization driver enable's - GPIO, PWM initialization, set PWM duty cycle and PWM frequency, start PWM, enable the engine, and start write log.

Application Task

This is a example which demonstrates the use of DC Motor 3 Click board. DC Motor 3 Click communicates with register via PWM interface. It shows moving in the clockwise direction of rotation from slow to fast speed and moving in the counter clockwise direction of rotation from fast to slow speed. Results are being sent to the Usart Terminal where you can track their changes.

Author
MikroE Team

Function Documentation

◆ application_init()

void application_init ( void  )

Logger initialization. Default baud rate: 115200 Default log level: LOG_LEVEL_DEBUG

Note
If USB_UART_RX and USB_UART_TX are defined as HAL_PIN_NC, you will need to define them manually for log to work. See LOG_MAP_USB_UART macro definition for detailed explanation.

◆ application_task()

void application_task ( void  )

◆ main()

void main ( void  )