flash5
2.0.0.0
|
Flash 5 Click is a perfect solution for the mass storage option in various embedded applications.
We provide a library for the Flash5 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for Flash5 Click driver.
void flash5_cfg_setup ( flash5_cfg_t *cfg );
FLASH5_RETVAL flash5_init ( flash5_t *ctx, flash5_cfg_t *cfg );
void flash5_page_read ( flash5_t *ctx, uint16_t page_num );
void flash5_page_load_memory ( flash5_t *ctx, uint16_t column_addr, uint8_t *data_buf, uint16_t buf_size );
void flash5_write_status_data ( flash5_t *ctx, uint8_t status_cmd, uint8_t status_addr, uint8_t status_data );
This application is for storing mass storage.
The demo application is composed of two sections :
Initializes driver, resets device, erasing one page of memory, tests communication and configures device.
Writes "MikroE" to device memory and then reads it and sends it to log.
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.