vreg2  2.0.0.0
Main Page

VREG 2 Click

VREG 2 Click is a voltage regulator Click, with outstanding performances.

Click Product page


Click library

  • Author : Stefan Filipovic
  • Date : Jun 2023.
  • Type : PWM type

Software Support

We provide a library for the Vreg2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Vreg2 Click driver.

Standard key functions :

Example key functions :

  • vreg2_set_duty_cycle This function sets the PWM duty cycle in percentages ( Range[ 0..1 ] ).
    err_t vreg2_set_duty_cycle ( vreg2_t *ctx, float duty_cycle );
  • vreg2_pwm_start This function starts the PWM module output.
    err_t vreg2_pwm_start ( vreg2_t *ctx );
  • vreg2_pwm_stop This function stops the PWM module output.
    err_t vreg2_pwm_stop ( vreg2_t *ctx );

Examples Description

This example demonstrates the use of the VREG 2 Click board by changing the voltage output every 5 seconds.

The demo application is composed of two sections :

Application Init

Initializes the driver and performs the Click default configuration.

void application_init ( void )
{
log_cfg_t log_cfg;
vreg2_cfg_t vreg2_cfg;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, " Application Init " );
// Click initialization.
vreg2_cfg_setup( &vreg2_cfg );
VREG2_MAP_MIKROBUS( vreg2_cfg, MIKROBUS_1 );
if ( PWM_ERROR == vreg2_init( &vreg2, &vreg2_cfg ) )
{
log_error( &logger, " Communication init." );
for ( ; ; );
}
if ( VREG2_ERROR == vreg2_default_cfg ( &vreg2 ) )
{
log_error( &logger, " Default configuration." );
for ( ; ; );
}
log_info( &logger, " Application Task " );
}

Application Task

Controls the voltage output by changing the PWM duty cycle every 5 seconds.

The duty cycle ranges from 10% to 50%. Each step will be logged on the USB UART where you can track the program flow.

void application_task ( void )
{
static int8_t duty_pct = 10;
static int8_t duty_step = 10;
if ( VREG2_OK == vreg2_set_duty_cycle ( &vreg2, ( float ) duty_pct / 100 ) )
{
log_printf( &logger, "\r\n Duty: %u%%\r\n", ( uint16_t ) duty_pct );
}
duty_pct += duty_step;
if ( ( duty_pct > 50 ) || ( duty_pct < 10 ) )
{
duty_step = -duty_step;
duty_pct += ( duty_step * 2 );
}
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
Delay_ms ( 1000 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.Vreg2

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.


vreg2_pwm_start
err_t vreg2_pwm_start(vreg2_t *ctx)
VREG 2 start PWM module.
vreg2_init
err_t vreg2_init(vreg2_t *ctx, vreg2_cfg_t *cfg)
VREG 2 initialization function.
VREG2_OK
@ VREG2_OK
Definition: vreg2.h:131
application_task
void application_task(void)
Definition: main.c:66
VREG2_MAP_MIKROBUS
#define VREG2_MAP_MIKROBUS(cfg, mikrobus)
MikroBUS pin mapping.
Definition: vreg2.h:91
vreg2_pwm_stop
err_t vreg2_pwm_stop(vreg2_t *ctx)
VREG 2 stop PWM module.
vreg2_default_cfg
err_t vreg2_default_cfg(vreg2_t *ctx)
VREG 2 default configuration function.
application_init
void application_init(void)
Definition: main.c:30
vreg2_set_duty_cycle
err_t vreg2_set_duty_cycle(vreg2_t *ctx, float duty_cycle)
VREG 2 sets PWM duty cycle.
VREG2_ERROR
@ VREG2_ERROR
Definition: vreg2.h:132
vreg2_cfg_t
VREG 2 Click configuration object.
Definition: vreg2.h:116
vreg2_cfg_setup
void vreg2_cfg_setup(vreg2_cfg_t *cfg)
VREG 2 configuration object setup function.
vreg2_t
VREG 2 Click context object.
Definition: vreg2.h:102