Go to the documentation of this file.
35 #include "mikrosdk_version.h"
38 #if mikroSDK_GET_VERSION < 20800ul
39 #include "rcu_delays.h"
45 #include "drv_digital_out.h"
46 #include "drv_digital_in.h"
47 #include "drv_i2c_master.h"
69 #define ILLUMINANCE_REG_CONTROL 0x00
70 #define ILLUMINANCE_REG_TIMING 0x01
71 #define ILLUMINANCE_REG_INTERRUPT 0x02
72 #define ILLUMINANCE_REG_THL_LOW 0x03
73 #define ILLUMINANCE_REG_THL_HIGH 0x04
74 #define ILLUMINANCE_REG_THH_LOW 0x05
75 #define ILLUMINANCE_REG_THH_HIGH 0x06
76 #define ILLUMINANCE_REG_ANALOG 0x07
77 #define ILLUMINANCE_REG_ID 0x12
78 #define ILLUMINANCE_REG_DATA0_LOW 0x14
79 #define ILLUMINANCE_REG_DATA0_HIGH 0x15
80 #define ILLUMINANCE_REG_DATA1_LOW 0x16
81 #define ILLUMINANCE_REG_DATA1_HIGH 0x17
82 #define ILLUMINANCE_REG_TIMER_LOW 0x18
83 #define ILLUMINANCE_REG_TIMER_HIGH 0x19
84 #define ILLUMINANCE_REG_ID2 0x1E
102 #define ILLUMINANCE_CMD_BIT 0x80
103 #define ILLUMINANCE_TRANSACTION_REPEATED 0x00
104 #define ILLUMINANCE_TRANSACTION_AUTO_INC 0x20
105 #define ILLUMINANCE_TRANSACTION_SPEC_FUNC 0x60
106 #define ILLUMINANCE_SPEC_FUNC_INT_CLEAR 0x01
107 #define ILLUMINANCE_SPEC_FUNC_STOP_MAN_INT 0x02
108 #define ILLUMINANCE_SPEC_FUNC_START_MAN_INT 0x03
114 #define ILLUMINANCE_CONTROL_ADC_INTR 0x20
115 #define ILLUMINANCE_CONTROL_ADC_VALID 0x10
116 #define ILLUMINANCE_CONTROL_ADC_ENABLE 0x02
117 #define ILLUMINANCE_CONTROL_POWER_ON 0x01
123 #define ILLUMINANCE_ATIME_MAX 688.5
124 #define ILLUMINANCE_ATIME_MIN 2.7
125 #define ILLUMINANCE_ATIME_STEP 2.7
126 #define ILLUMINANCE_DEFAULT_ATIME 200.0
132 #define ILLUMINANCE_ENABLE_INTERRUPT 0x10
138 #define ILLUMINANCE_GAIN_1X 0x00
139 #define ILLUMINANCE_GAIN_8X 0x01
140 #define ILLUMINANCE_GAIN_16X 0x02
141 #define ILLUMINANCE_GAIN_111X 0x03
147 #define ILLUMINANCE_ID_PARTNO 0x90
148 #define ILLUMINANCE_ID2 0x30
155 #define ILLUMINANCE_SET_DEV_ADDR_GND 0x29
156 #define ILLUMINANCE_SET_DEV_ADDR_FLOAT 0x39
157 #define ILLUMINANCE_SET_DEV_ADDR_VCC 0x49
175 #define ILLUMINANCE_MAP_MIKROBUS( cfg, mikrobus ) \
176 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
177 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \
178 cfg.int_pin = MIKROBUS( mikrobus, MIKROBUS_INT )
403 #endif // ILLUMINANCE_H
float atime_ms
Definition: illuminance.h:198
pin_name_t sda
Definition: illuminance.h:210
err_t illuminance_default_cfg(illuminance_t *ctx)
Illuminance default configuration function.
digital_in_t int_pin
Definition: illuminance.h:190
err_t illuminance_read_register(illuminance_t *ctx, uint8_t reg, uint8_t *data_out)
Illuminance read register function.
uint8_t illuminance_get_int_pin(illuminance_t *ctx)
Illuminance get int pin function.
@ ILLUMINANCE_OK
Definition: illuminance.h:225
err_t illuminance_init(illuminance_t *ctx, illuminance_cfg_t *cfg)
Illuminance initialization function.
err_t illuminance_check_communication(illuminance_t *ctx)
Illuminance check communication function.
err_t illuminance_set_atime(illuminance_t *ctx, float atime_ms)
Illuminance set atime function.
uint8_t gain
Definition: illuminance.h:199
@ ILLUMINANCE_ERROR
Definition: illuminance.h:226
uint8_t slave_address
Definition: illuminance.h:196
err_t illuminance_generic_read(illuminance_t *ctx, uint8_t reg, uint8_t *rx_buf, uint8_t rx_len)
Illuminance I2C reading function.
illuminance_return_value_t
Illuminance Click return value data.
Definition: illuminance.h:224
uint8_t i2c_address
Definition: illuminance.h:215
pin_name_t int_pin
Definition: illuminance.h:212
i2c_master_t i2c
Definition: illuminance.h:193
pin_name_t scl
Definition: illuminance.h:209
err_t illuminance_write_register(illuminance_t *ctx, uint8_t reg, uint8_t data_in)
Illuminance write register function.
Illuminance Click context object.
Definition: illuminance.h:188
Illuminance Click configuration object.
Definition: illuminance.h:208
err_t illuminance_set_gain(illuminance_t *ctx, uint8_t gain)
Illuminance set gain function.
err_t illuminance_read_raw_data(illuminance_t *ctx, uint16_t *ch_0, uint16_t *ch_1)
Illuminance read raw data function.
void illuminance_cfg_setup(illuminance_cfg_t *cfg)
Illuminance configuration object setup function.
uint32_t i2c_speed
Definition: illuminance.h:214
err_t illuminance_generic_write(illuminance_t *ctx, uint8_t reg, uint8_t *tx_buf, uint8_t tx_len)
Illuminance I2C writing function.