Go to the documentation of this file.
42 #ifdef PREINIT_SUPPORTED
46 #ifdef MikroCCoreVersion
47 #if MikroCCoreVersion >= 1
52 #include "drv_digital_out.h"
53 #include "drv_digital_in.h"
54 #include "drv_i2c_master.h"
67 #define IRSENSE_MAP_MIKROBUS( cfg, mikrobus ) \
68 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
69 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \
70 cfg.pdn = MIKROBUS( mikrobus, MIKROBUS_CS ); \
71 cfg.int_pin = MIKROBUS( mikrobus, MIKROBUS_INT )
78 #define IRSENSE_RETVAL uint8_t
80 #define IRSENSE_OK 0x00
81 #define IRSENSE_INIT_ERROR 0xFF
88 #define IRSENSE_I2C_ADDRESS_0 0x64
89 #define IRSENSE_I2C_ADDRESS_1 0x65
90 #define IRSENSE_I2C_ADDRESS_2 0x66
97 #define IRSENSE_REG_WIA1 0x00
98 #define IRSENSE_REG_WIA2 0x01
99 #define IRSENSE_REG_INFO1 0x02
100 #define IRSENSE_REG_INFO2 0x03
101 #define IRSENSE_REG_INTST 0x04
102 #define IRSENSE_REG_ST1 0x05
103 #define IRSENSE_REG_IR1_LOW 0x06
104 #define IRSENSE_REG_IR1_HIGH 0x07
105 #define IRSENSE_REG_IR2_LOW 0x08
106 #define IRSENSE_REG_IR2_HIGH 0x09
107 #define IRSENSE_REG_IR3_LOW 0x0A
108 #define IRSENSE_REG_IR3_HIGH 0x0B
109 #define IRSENSE_REG_IR4_LOW 0x0C
110 #define IRSENSE_REG_IR4_HIGH 0x0D
111 #define IRSENSE_REG_TMP_LOW 0x0E
112 #define IRSENSE_REG_TMP_HIGH 0x0F
113 #define IRSENSE_REG_ST2 0x10
114 #define IRSENSE_REG_ETH13H_LOW 0x11
115 #define IRSENSE_REG_ETH13H_HIGH 0x12
116 #define IRSENSE_REG_ETH13L_LOW 0x13
117 #define IRSENSE_REG_ETH13L_HIGH 0x14
118 #define IRSENSE_REG_ETH24H_LOW 0x15
119 #define IRSENSE_REG_ETH24H_HIGH 0x16
120 #define IRSENSE_REG_ETH24L_LOW 0x17
121 #define IRSENSE_REG_ETH24L_HIGH 0x18
122 #define IRSENSE_REG_EHYS13 0x19
123 #define IRSENSE_REG_EHYS24 0x1A
124 #define IRSENSE_REG_EINTEN 0x1B
125 #define IRSENSE_REG_ECNTL1 0x1C
126 #define IRSENSE_REG_CNTL2 0x1D
133 #define IRSENSE_EEPROM_MAP_EKEY 0x50
134 #define IRSENSE_EEPROM_MAP_ETH13H_LOW 0x51
135 #define IRSENSE_EEPROM_MAP_ETH13H_HIGH 0x52
136 #define IRSENSE_EEPROM_MAP_ETH13L_LOW 0x53
137 #define IRSENSE_EEPROM_MAP_ETH13L_HIGH 0x54
138 #define IRSENSE_EEPROM_MAP_ETH24H_LOW 0x55
139 #define IRSENSE_EEPROM_MAP_ETH24H_HIGH 0x56
140 #define IRSENSE_EEPROM_MAP_ETH24L_LOW 0x57
141 #define IRSENSE_EEPROM_MAP_ETH24L_HIGH 0x58
142 #define IRSENSE_EEPROM_MAP_EHYS13 0x59
143 #define IRSENSE_EEPROM_MAP_EHYS24 0x5A
144 #define IRSENSE_EEPROM_MAP_EINTEN 0x5B
145 #define IRSENSE_EEPROM_MAP_ECNTL1 0x5C
152 #define IRSENSE_ECNTL1_MODE_STAND_BY 0x00
153 #define IRSENSE_ECNTL1_MODE_EEPROM_ACCESS 0x01
154 #define IRSENSE_ECNTL1_MODE_SINGLE_SHOT 0x02
155 #define IRSENSE_ECNTL1_MODE_BE_PROHIBITED 0x03
156 #define IRSENSE_ECNTL1_MODE_CONTINUOUS_0 0x04
157 #define IRSENSE_ECNTL1_MODE_CONTINUOUS_1 0x05
158 #define IRSENSE_ECNTL1_MODE_CONTINUOUS_2 0x06
159 #define IRSENSE_ECNTL1_MODE_CONTINUOUS_3 0x07
160 #define IRSENSE_ECNTL1_CUTOFF_FREQUENCY_0_3_Hz 0x00
161 #define IRSENSE_ECNTL1_CUTOFF_FREQUENCY_0_6_Hz 0x08
162 #define IRSENSE_ECNTL1_CUTOFF_FREQUENCY_1_1_Hz 0x10
163 #define IRSENSE_ECNTL1_CUTOFF_FREQUENCY_2_2_Hz 0x18
164 #define IRSENSE_ECNTL1_CUTOFF_FREQUENCY_4_4_Hz 0x20
165 #define IRSENSE_ECNTL1_CUTOFF_FREQUENCY_8_8_Hz 0x28
172 #define IRSENSE_EINTEN_IR13_HIGH_INT_DISABLE 0x00
173 #define IRSENSE_EINTEN_IR13_HIGH_INT_ENABLE 0x01
174 #define IRSENSE_EINTEN_IR13_LOW_INT_DISABLE 0x00
175 #define IRSENSE_EINTEN_IR13_LOW_INT_ENABLE 0x01
176 #define IRSENSE_EINTEN_IR24_HIGH_INT_DISABLE 0x00
177 #define IRSENSE_EINTEN_IR24_HIGH_INT_ENABLE 0x01
178 #define IRSENSE_EINTEN_IR24_LOW_INT_DISABLE 0x00
179 #define IRSENSE_EINTEN_IR24_LOW_INT_ENABLE 0x01
180 #define IRSENSE_EINTEN_DRI_INT_DISABLE 0x00
181 #define IRSENSE_EINTEN_DRI_INT_ENABLE 0x01
183 #define IRSENSE_CNTL2_SOFT_RESET 0x01
184 #define IRSENSE_EEPROM_MAP_VAL_EKEY 0xA5
185 #define IRSENSE_ENABLE_SETTINGS_EEPROM_MODE 0x38
186 #define IRSENSE_ENABLE_EEPROM_MODE 0xC1
187 #define IRSENSE_EINTEN_RESET_VALUE 0xC0
952 #endif // _IRSENSE_H_
uint8_t irsense_read_interrupt_status(irsense_t *ctx)
Get interrupts activate or inactivate corresponding status value function.
uint16_t eth13h
Definition: irsense.h:251
digital_out_t pdn
Definition: irsense.h:204
uint8_t ir13l
Definition: irsense.h:238
uint8_t irsense_check_int_states(irsense_t *ctx)
Check state of INT pin function.
void irsense_read_hysteresis_eeprom(irsense_t *ctx, uint8_t *eehys24, uint8_t *eehys13)
Get Hysteresis EEPROM value for all channes function.
void irsense_set_mode(irsense_t *ctx, uint8_t mode)
Set the mode function.
void irsense_set_threshold_eeprom_ir1_ir3(irsense_t *ctx, uint8_t value)
Set high or low EEPROM threshold for channel 1 and channel 3 ( Ir1-Ir3 ) function.
pin_name_t pdn
Definition: irsense.h:278
void irsense_set_hysteresis_ir1_ir3(irsense_t *ctx, uint8_t value)
Set hysteresis setting of threshold level for channel 1 and channel 3 ( Ir1-Ir3 ) function.
uint16_t eeth13h
Definition: irsense.h:262
uint8_t irsense_read_byte(irsense_t *ctx, uint8_t reg_address)
Generic read the byte of data function.
int16_t irsense_get_ir4(irsense_t *ctx)
Get value of sensor channel 4 function.
uint8_t ir13h
Definition: irsense.h:237
void irsense_cfg_setup(irsense_cfg_t *cfg)
Config Object Initialization function.
void irsense_set_threshold_ir2_ir4(irsense_t *ctx, uint8_t value)
Set high or low threshold for channel 2 and channel 4 ( Ir2-Ir4 ) function.
int16_t left_area
Definition: irsense.h:226
void irsense_refresh(irsense_t *ctx)
Refresh by read dummy data function.
Click ctx object definition.
Definition: irsense.h:201
uint8_t slave_address
Definition: irsense.h:216
void irsense_write_byte(irsense_t *ctx, uint8_t reg_address, uint8_t write_data)
Generic write the byte of data function.
i2c_master_t i2c
Definition: irsense.h:212
uint16_t eth13l
Definition: irsense.h:252
Click configuration structure definition.
Definition: irsense.h:270
void irsense_read_threshold_eeprom(irsense_t *ctx, irsense_eeprom_t *eeprom)
Get threshold EEPROM value for all channels function.
Register address structure definition.
Definition: irsense.h:248
void irsense_set_threshold_ir1_ir3(irsense_t *ctx, uint8_t value)
Set high or low threshold for channel 1 and channel 3 ( Ir1-Ir3 ) function.
uint8_t ir24l
Definition: irsense.h:240
uint16_t eeth24l
Definition: irsense.h:261
uint16_t eeth24h
Definition: irsense.h:260
int16_t bottom_area
Definition: irsense.h:225
uint8_t irsense_check_overrun(irsense_t *ctx)
Checks to see if data overrun flag is set in the status register function.
void irsense_set_interrupts_reg(irsense_t *ctx, irsense_eint_t *eint)
Sets interrupts activate or inactivate corresponding function.
void irsense_set_hysteresis_ir2_ir4(irsense_t *ctx, uint8_t value)
Set hysteresis setting of threshold level for channel 2 and channel 4 ( Ir2-Ir4 ) function.
uint16_t irsense_read_data(irsense_t *ctx, uint8_t reg_address_low)
Generic read 16-bit of data function.
uint8_t i2c_address
Definition: irsense.h:284
void irsense_set_hysteresis_eeprom_ir2_ir4(irsense_t *ctx, uint8_t value)
Set hysteresis EEPROM setting of threshold level for channel 2 and channel 4 ( Ir2-Ir4 ) function.
uint16_t irsense_get_threshold_ir2_ir4(irsense_t *ctx)
Get threshold value for channel 2 and channel 4 ( Ir2-Ir4 ) function.
pin_name_t sda
Definition: irsense.h:274
void irsense_get_ir_sense(irsense_t *ctx, irsense_ir_data_t *ir_data)
Get value of sensor all channels function.
int16_t right_area
Definition: irsense.h:227
void irsense_generic_write(irsense_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic write function.
int16_t irsense_get_ir1(irsense_t *ctx)
Get value of sensor channel 1 function.
void irsense_set_threshold_eeprom_ir2_ir4(irsense_t *ctx, uint8_t value)
Set high or low EEPROM threshold for channel 2 and channel 4 ( Ir2-Ir4 ) function.
uint8_t ir24h
Definition: irsense.h:239
void irsense_power_on(irsense_t *ctx)
Enable the sensor function.
uint8_t irsense_get_status(irsense_t *ctx)
Get status value function.
digital_in_t int_pin
Definition: irsense.h:208
IRSENSE_RETVAL irsense_init(irsense_t *ctx, irsense_cfg_t *cfg)
Initialization function.
void irsense_enable_data_ready_interrupt(irsense_t *ctx)
Sets interrupts source settings function.
int16_t irsense_get_ir3(irsense_t *ctx)
Get value of sensor channel 3 function.
uint8_t irsense_get_company_code(irsense_t *ctx)
Get company code function.
uint32_t i2c_speed
Definition: irsense.h:283
uint8_t irsense_check_available(irsense_t *ctx)
Checks to see if DRDY flag is set in the status register function.
void irsense_read_hysteresis(irsense_t *ctx, uint8_t *ehys24, uint8_t *ehys13)
Get Hysteresis value for all channes function.
pin_name_t scl
Definition: irsense.h:273
IR data structure definition.
Definition: irsense.h:224
int16_t top_area
Definition: irsense.h:228
uint16_t eth24h
Definition: irsense.h:249
float irsense_get_temperature_f(irsense_t *ctx)
Get the temperature in Fahrenheit degrees function.
pin_name_t int_pin
Definition: irsense.h:279
float irsense_get_temperature(irsense_t *ctx)
Get the temperature in degrees Celsius function.
EEPROM map structure definition.
Definition: irsense.h:259
void irsense_set_configuration(irsense_t *ctx, uint8_t register_value)
Set configuration function.
void irsense_read_threshold(irsense_t *ctx, irsense_reg_t *reg)
Get threshold value for all channels function.
void irsense_power_off(irsense_t *ctx)
Disable the sensor function.
int16_t irsense_get_ir2(irsense_t *ctx)
Get value of sensor channel 2 function.
#define IRSENSE_RETVAL
Definition: irsense.h:78
uint8_t irsense_get_device_id(irsense_t *ctx)
Get device ID function.
uint16_t irsense_get_threshold_ir1_ir3(irsense_t *ctx)
Get threshold value for channel 1 and channel 3 ( Ir1-Ir3 ) function.
uint8_t dr
Definition: irsense.h:241
uint16_t eeth13l
Definition: irsense.h:263
uint16_t eth24l
Definition: irsense.h:250
void irsense_set_cutoff_frequency(irsense_t *ctx, uint8_t frequency)
Set the cutoff frequency function.
void irsense_set_hysteresis_eeprom_ir1_ir3(irsense_t *ctx, uint8_t value)
Set hysteresis EEPROM setting of threshold level for channel 1 and channel 3 ( Ir1-Ir3 ) function.
void irsense_soft_reset(irsense_t *ctx)
Soft reset function.
Enable interrupt structure definition.
Definition: irsense.h:236
void irsense_generic_read(irsense_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic read function.