magneto5  2.0.0.0
Main Page

Magneto 5 click

Magneto 5 click is a very accurate and reliable magnetic sensor device, which features the MEMSIC MMC34160PJ, a 3-axis magnetic sensor IC

click Product page


Click library

  • Author : MikroE Team
  • Date : dec 2019.
  • Type : I2C type

Software Support

We provide a library for the Magneto5 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Magneto5 Click driver.

Standard key functions :

  • Config Object Initialization function.

    void magneto5_cfg_setup ( magneto5_cfg_t *cfg );

  • Initialization function.

    MAGNETO5_RETVAL magneto5_init ( magneto5_t *ctx, magneto5_cfg_t *cfg );

  • Click Default Configuration function.

    void magneto5_default_cfg ( magneto5_t *ctx );

Example key functions :

  • Functions reads axis data.

    void magneto5_get_axis_data ( magneto5_t *ctx, int16_t *axis_buffer, uint8_t max_resolution );

  • Functions reads axis data value.

    float magneto5_get_axis_value ( magneto5_t *ctx, uint8_t axis, uint8_t max_resolution );

  • Functions sets configuration register 0.

    void magneto5_config_register_0 ( magneto5_t *ctx, uint8_t config_data );

Examples Description

This application is is a very accurate and reliable magnetic sensor device.

The demo application is composed of two sections :

Application Init

Initializes driver init and set measurement mode and channel.

void application_init ( void )
{
log_cfg_t log_cfg;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
MAGNETO5_MAP_MIKROBUS( cfg, MIKROBUS_1 );
magneto5_init( &magneto5, &cfg );
}

Application Task

Reads X / Y / Z data axis and logs to USBUART every 1 sec.

void application_task ( void )
{
// Task implementation.
log_printf ( &logger, "-- X axis : %d \r\n ", x_axis );
log_printf ( &logger, "-- Y axis : %d \r\n ", y_axis );
log_printf ( &logger, "-- Z axis : %d \r\n ", z_axis );
Delay_ms( 1000 );
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.Magneto5

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.


MAGNETO5_CH3_12bits_1ms
#define MAGNETO5_CH3_12bits_1ms
Definition: magneto5.h:133
application_task
void application_task(void)
Definition: main.c:58
MAGNETO5_MAP_MIKROBUS
#define MAGNETO5_MAP_MIKROBUS(cfg, mikrobus)
Definition: magneto5.h:52
MAGNETO5_AXIS_Z
#define MAGNETO5_AXIS_Z
Definition: magneto5.h:101
magneto5_cfg_t
Click configuration structure definition.
Definition: magneto5.h:165
application_init
void application_init(void)
Definition: main.c:32
magneto5_cfg_setup
void magneto5_cfg_setup(magneto5_cfg_t *cfg)
Config Object Initialization function.
MAGNETO5_AXIS_X
#define MAGNETO5_AXIS_X
Definition: magneto5.h:99
MAGNETO5_AXIS_Y
#define MAGNETO5_AXIS_Y
Definition: magneto5.h:100
magneto5_init
MAGNETO5_RETVAL magneto5_init(magneto5_t *ctx, magneto5_cfg_t *cfg)
Initialization function.
magneto5_get_axis_value
float magneto5_get_axis_value(magneto5_t *ctx, uint8_t axis, uint8_t max_resolution)
Functions reads axis data value.