powerreset  2.0.0.0
Main Page

Power Reset Click

Power/Reset Click is equipped with two capacitive touch pads on a single Click boardâ„¢.

Click Product page


Click library

  • Author : MikroE Team
  • Date : Dec 2019.
  • Type : GPIO type

Software Support

We provide a library for the PowerReset Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for PowerReset Click driver.

Standard key functions :

Example key functions :

Examples Description

Reads PWR and RST pin states and performs a control of the timer counter depending on the pressed button.

The demo application is composed of two sections :

Application Init

Initializes device and logger module, prints Initialization done message.

void application_init ( void )
{
log_cfg_t log_cfg;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
POWERRESET_MAP_MIKROBUS( cfg, MIKROBUS_1 );
powerreset_init( &powerreset, &cfg );
Delay_ms ( 100 );
log_printf( &logger, "** Touch Button initialization done **\r\n");
log_printf( &logger, "**************************************\r\n");
}

Application Task

Checks the states of the PWR and RST pins and logs every change.

void application_task ( void )
{
{
{
log_printf( &logger, "POWER ON\r\n" );
Delay_ms ( 100 );
}
{
log_printf( &logger, "POWER OFF\r\n" );
Delay_ms ( 100 );
}
}
{
{
log_printf( &logger, "Reset occured!\r\n" );
Delay_ms ( 100 );
}
}
}

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.PowerReset

Additional notes and informations

Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.


application_task
void application_task(void)
Definition: main.c:68
POWERRESET_ACTIVE
#define POWERRESET_ACTIVE
Definition: powerreset.h:85
powerreset_init
POWERRESET_RETVAL powerreset_init(powerreset_t *ctx, powerreset_cfg_t *cfg)
Initialization function.
POWERRESET_INACTIVE
#define POWERRESET_INACTIVE
Definition: powerreset.h:86
POWERRESET_MAP_MIKROBUS
#define POWERRESET_MAP_MIKROBUS(cfg, mikrobus)
Definition: powerreset.h:65
pwr_state
powerreset_state_t pwr_state
Definition: main.c:30
powerreset_get_rst
powerreset_state_t powerreset_get_rst(powerreset_t *ctx)
Reset Check function.
application_init
void application_init(void)
Definition: main.c:38
powerreset_cfg_setup
void powerreset_cfg_setup(powerreset_cfg_t *cfg)
Config Object Initialization function.
new_pwr_state
powerreset_state_t new_pwr_state
Definition: main.c:33
new_rst_state
powerreset_state_t new_rst_state
Definition: main.c:34
powerreset_cfg_t
Click configuration structure definition.
Definition: powerreset.h:112
rst_state
powerreset_state_t rst_state
Definition: main.c:31
powerreset_get_pwr
powerreset_state_t powerreset_get_pwr(powerreset_t *ctx)
Power Check function.