spectral2
2.0.0.0
|
Spectral 2 Click is a multispectral color sensing device, which uses the state-of-the-art sensor IC for a very accurate color sensing.
We provide a library for the Spectral2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for Spectral2 Click driver.
void spectral2_cfg_setup ( spectral2_cfg_t *cfg );
SPECTRAL2_RETVAL spectral2_init ( spectral2_t *ctx, spectral2_cfg_t *cfg );
void spectral2_default_cfg ( spectral2_t *ctx );
void spectral2_set_integration_time ( spectral2_t *ctx, uint8_t cur_time );
int16_t spectral2_get_data ( spectral2_t *ctx, uint8_t data_reg );
float spectral2_get_calibrated_data ( spectral2_t *ctx, uint8_t data_reg );
This application enables usage of multispectral color sensor.
The demo application is composed of two sections :
Driver initialize, reset module and configuration measurement
Reads the brightness value with R, G, B, I, O and V filter, every 1 second, and logs on to USBUART.
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.