Go to the documentation of this file.
42 #ifdef PREINIT_SUPPORTED
46 #ifdef MikroCCoreVersion
47 #if MikroCCoreVersion >= 1
52 #include "drv_digital_out.h"
53 #include "drv_digital_in.h"
54 #include "drv_spi_master.h"
67 #define TOUCHKEY3_MAP_MIKROBUS( cfg, mikrobus ) \
68 cfg.miso = MIKROBUS( mikrobus, MIKROBUS_MISO ); \
69 cfg.mosi = MIKROBUS( mikrobus, MIKROBUS_MOSI ); \
70 cfg.sck = MIKROBUS( mikrobus, MIKROBUS_SCK ); \
71 cfg.cs = MIKROBUS( mikrobus, MIKROBUS_CS ); \
72 cfg.rst = MIKROBUS( mikrobus, MIKROBUS_RST ); \
73 cfg.int_pin = MIKROBUS( mikrobus, MIKROBUS_INT )
80 #define TOUCHKEY3_RETVAL uint8_t
82 #define TOUCHKEY3_OK 0x00
83 #define TOUCHKEY3_INIT_ERROR 0xFF
90 #define TOUCHKEY3_CMD_SENDSETUP 0x01
91 #define TOUCHKEY3_CMD_RESET 0x04
92 #define TOUCHKEY3_CMD_SLEEP 0x05
93 #define TOUCHKEY3_CMD_EEPROM_STORE 0x0A
94 #define TOUCHKEY3_CMD_EEPROM_RESTORE 0x0B
95 #define TOUCHKEY3_CMD_EEPROM_ERASE 0x0C
96 #define TOUCHKEY3_CMD_EEPROM_RECOVER 0x0D
103 #define TOUCHKEY3_CMD_CALLIBRATE_ALL 0x03
104 #define TOUCHKEY3_CMD_CALLIBRATE_0 0x10
105 #define TOUCHKEY3_CMD_CALLIBRATE_1 0x11
106 #define TOUCHKEY3_CMD_CALLIBRATE_2 0x12
107 #define TOUCHKEY3_CMD_CALLIBRATE_3 0x13
108 #define TOUCHKEY3_CMD_CALLIBRATE_4 0x14
109 #define TOUCHKEY3_CMD_CALLIBRATE_5 0x15
110 #define TOUCHKEY3_CMD_CALLIBRATE_6 0x16
117 #define TOUCHKEY3_REQ_FIRST_KEY 0xC0
118 #define TOUCHKEY3_REQ_ALL_KEYS 0xC1
119 #define TOUCHKEY3_REQ_DEVICE_STATUS 0xC2
120 #define TOUCHKEY3_REQ_EEPROM_CRC 0xC3
121 #define TOUCHKEY3_REQ_RAM_CRC 0xC4
122 #define TOUCHKEY3_REQ_ERROR_KEYS 0xC5
129 #define TOUCHKEY3_REQ_LAST_COMMAND 0xC7
130 #define TOUCHKEY3_REQ_SETUP_DATA 0xC8
131 #define TOUCHKEY3_REQ_DEVICE_ID 0xC9
132 #define TOUCHKEY3_REQ_FIRMWARE_VERSION 0xCA
304 #endif // _TOUCHKEY3_H_
uint32_t spi_speed
Definition: touchkey3.h:182
digital_out_t cs
Definition: touchkey3.h:150
pin_name_t sck
Definition: touchkey3.h:172
pin_name_t chip_select
Definition: touchkey3.h:159
pin_name_t miso
Definition: touchkey3.h:170
pin_name_t mosi
Definition: touchkey3.h:171
Click ctx object definition.
Definition: touchkey3.h:146
digital_in_t int_pin
Definition: touchkey3.h:154
pin_name_t rst
Definition: touchkey3.h:177
TOUCHKEY3_RETVAL touchkey3_init(touchkey3_t *ctx, touchkey3_cfg_t *cfg)
Initialization function.
spi_master_t spi
Definition: touchkey3.h:158
void touchkey3_send_request(touchkey3_t *ctx, uint8_t request, uint8_t *p_response)
Send request.
digital_out_t rst
Definition: touchkey3.h:149
pin_name_t cs
Definition: touchkey3.h:173
void touchkey3_generic_transfer(touchkey3_t *ctx, uint8_t *wr_buf, uint16_t wr_len, uint8_t *rd_buf, uint16_t rd_len)
Generic transfer function.
void touchkey3_set_data(touchkey3_t *ctx, uint8_t data_address, uint8_t write_data)
Set configuration data.
spi_master_mode_t spi_mode
Definition: touchkey3.h:183
pin_name_t int_pin
Definition: touchkey3.h:178
Click configuration structure definition.
Definition: touchkey3.h:167
void touchkey3_send_setup(touchkey3_t *ctx, uint8_t *p_setup_data)
Send setup data.
void touchkey3_send_command(touchkey3_t *ctx, uint8_t command)
Send command.
void touchkey3_cfg_setup(touchkey3_cfg_t *cfg)
Config Object Initialization function.
void touchkey3_reset(touchkey3_t *ctx)
Reset function.
spi_master_chip_select_polarity_t cs_polarity
Definition: touchkey3.h:184
void touchkey3_get_data(touchkey3_t *ctx, uint8_t data_address, uint8_t *read_data)
Read configuration data.
#define TOUCHKEY3_RETVAL
Definition: touchkey3.h:80