c7segrgb
2.0.0.0
|
7-SEG RGB Click example More...
Macros | |
#define | DELAY_SHORT |
#define | DELAY_LONG |
Functions | |
void | logic_one (void) |
void | logic_zero (void) |
void | application_init (void) |
void | application_task (void) |
void | main (void) |
7-SEG RGB Click example
This click shows all ten digits on a full-color single 7 segment digit display. Each segment has R, G, B LEDs that can be adjusted in 255 steps and the ability to control the brightness of all the LED.
The demo application is composed of two sections :
Initialization driver enables - GPIO.
This is an example which demonstrates the use of 7-SEG RGB Click board. This simple example shows all ten digits in different colors on 7-SEG RGB click.
note:
Additional Functions : void logic_one ( ) - Generic logic one function. void logic_zero ( ) - Generic logic zero function.
Timeing sequence chart: --------—| T0L T0H |______________ Logic 0: T0H ~ 250-550ns T0L ~ 700-1000ns
--------—| T1L T1H |______________ Logic 1: T1H ~ 700-1000ns T1L ~ 250-550ns
#define DELAY_LONG |
#define DELAY_SHORT |
void application_init | ( | void | ) |
Logger initialization. Default baud rate: 115200 Default log level: LOG_LEVEL_DEBUG
void application_task | ( | void | ) |
void logic_one | ( | void | ) |
void logic_zero | ( | void | ) |
void main | ( | void | ) |