Go to the documentation of this file.
38 #include "drv_digital_out.h"
39 #include "drv_digital_in.h"
40 #include "drv_i2c_master.h"
52 #define THERMO8_MAP_MIKROBUS( cfg, mikrobus ) \
53 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
54 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \
55 cfg.ale = MIKROBUS( mikrobus, MIKROBUS_INT )
62 #define THERMO8_RETVAL uint8_t
64 #define THERMO8_OK 0x00
65 #define THERMO8_INIT_ERROR 0xFF
72 #define THERMO8_ADDR0 0x18
73 #define THERMO8_ADDR1 (0x18 | 0x01)
74 #define THERMO8_ADDR2 (0x18 | 0x02)
75 #define THERMO8_ADDR3 (0x18 | 0x03)
76 #define THERMO8_ADDR4 (0x18 | 0x04)
77 #define THERMO8_ADDR5 (0x18 | 0x05)
78 #define THERMO8_ADDR6 (0x18 | 0x06)
79 #define THERMO8_ADDR7 (0x18 | 0x07)
86 #define THERMO8_CONFIG 0x01
87 #define THERMO8_TUPPER 0x02
88 #define THERMO8_TLOWER 0x03
89 #define THERMO8_TCRIT 0x04
90 #define THERMO8_TUPPER_REACHED 0x03
91 #define THERMO8_TLOWER_REACHED 0x0C
92 #define THERMO8_TCRIT_REACHED 0x30
93 #define THERMO8_TCRIT_ONLY_ALERT 1
94 #define THERMO8_ALERT_ON_ALL 0
95 #define THERMO8_THYS_0C 0x00
96 #define THERMO8_THYS_1C5 0x01
97 #define THERMO8_THYS_3C 0x02
98 #define THERMO8_THYS_6C 0x03
105 #define THERMO8_TA 0x05
106 #define THERMO8_MANID 0x06
107 #define THERMO8_DEVID 0x07
114 #define THERMO8_RESOLUTION_REG 0x08
115 #define THERMO8_R05C_30MS 0x00
116 #define THERMO8_R025C_65MS 0x01
117 #define THERMO8_R0125C_130MS 0x02
118 #define THERMO8_R00625C_250MS 0x03
413 #endif // _THERMO8_H_
void thermo8_tcrit_unlock(thermo8_t *ctx)
Function for unlocking the critical temperature setting register.
float thermo8_get_temperature(thermo8_t *ctx)
Function will return the temperature value in �C.
digital_in_t ale
Definition: thermo8.h:135
void thermo8_generic_write(thermo8_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic write function.
uint32_t i2c_speed
Definition: thermo8.h:164
#define THERMO8_RETVAL
Definition: thermo8.h:62
pin_name_t sda
Definition: thermo8.h:156
uint16_t thermo8_read_reg(thermo8_t *ctx, uint8_t r_addr)
Function for reading from 16 bit registers.
void thermo8_write_reg(thermo8_t *ctx, uint8_t r_addr, uint16_t r_data)
Function for writing to 16 bit registers.
void thermo8_limit_set(thermo8_t *ctx, uint8_t limit_reg_addr, float limit)
Function for setting the temperature alarm levels for the lower, upper and critical alert levels.
pin_name_t scl
Definition: thermo8.h:155
Click configuration structure definition.
Definition: thermo8.h:152
void thermo8_generic_read(thermo8_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic read function.
uint16_t thermo8_get_man_id(thermo8_t *ctx)
Function will return the manufacturer ID.
void thermo8_cfg_setup(thermo8_cfg_t *cfg)
Config Object Initialization function.
uint8_t thermo8_get_alert_stat(thermo8_t *ctx)
Function will return all alert states.
uint8_t i2c_address
Definition: thermo8.h:165
void thermo8_tcrit_lock(thermo8_t *ctx)
Function for locking the critical temperature setting register.
void thermo8_set_resolution(thermo8_t *ctx, uint8_t r_cfg)
Function will set the conversion resoult temperature step depending on the passed constant.
Click ctx object definition.
Definition: thermo8.h:132
uint16_t thermo8_get_dev_id(thermo8_t *ctx)
Function will return the device ID.
void thermo8_win_lock(thermo8_t *ctx)
Function for locking the Tupper and Tlower registers.
uint8_t thermo8_read_reg_8(thermo8_t *ctx, uint8_t r_addr)
Function for single byte read's.
uint8_t thermo8_ale_get(thermo8_t *ctx)
Function for returning the state of the alert pin.
i2c_master_t i2c
Definition: thermo8.h:139
void thermo8_default_cfg(thermo8_t *ctx)
Click Default Configuration function.
void thermo8_win_unlock(thermo8_t *ctx)
Function for unlocking the Tupper and Tlower registers.
uint8_t slave_address
Definition: thermo8.h:143
THERMO8_RETVAL thermo8_init(thermo8_t *ctx, thermo8_cfg_t *cfg)
Initialization function.
void thermo8_alert_enable(thermo8_t *ctx, uint8_t thys, uint8_t alert_cfg)
Function for setting the Tupper and Tlower hysterezis level as well as the alert mode.
void thermo8_write_reg_8(thermo8_t *ctx, uint8_t r_addr, uint8_t r_data)
Function for single byte writes.
void thermo8_sleep(thermo8_t *ctx)
Function will place Thermo 8 to the low power mode.
void thermo8_wake_up(thermo8_t *ctx)
Function for waking up the click board from the sleep mode.
pin_name_t ale
Definition: thermo8.h:160
uint16_t limit_status
Definition: thermo8.h:144