Go to the documentation of this file.
38 #include "drv_digital_out.h"
39 #include "drv_i2c_master.h"
40 #include "drv_spi_master.h"
53 #define THERMO9_MAP_MIKROBUS( cfg, mikrobus ) \
54 cfg.scl = MIKROBUS( mikrobus, MIKROBUS_SCL ); \
55 cfg.sda = MIKROBUS( mikrobus, MIKROBUS_SDA ); \
56 cfg.miso = MIKROBUS( mikrobus, MIKROBUS_MISO ); \
57 cfg.mosi = MIKROBUS( mikrobus, MIKROBUS_MOSI ); \
58 cfg.sck = MIKROBUS( mikrobus, MIKROBUS_SCK ); \
59 cfg.cs = MIKROBUS( mikrobus, MIKROBUS_CS )
66 #define THERMO9_MASTER_I2C 0
67 #define THERMO9_MASTER_SPI 1
74 #define THERMO9_RETVAL uint8_t
76 #define THERMO9_OK 0x00
77 #define THERMO9_INIT_ERROR 0xFF
83 #define THERMO9_ADDR_VCC 0x76
84 #define THERMO9_ADDR_GND 0x77
91 #define THERMO9_DUMMY_BYTE 0x00
92 #define THERMO9_RESET_CMD 0x1E
93 #define THERMO9_START_ADC_TEMP_CONV 0x48
94 #define THERMO9_READ_ADC_TEMP_RES 0x00
95 #define THERMO9_PROM_READ_ADR_0 0xA0
96 #define THERMO9_PROM_READ_ADR_1_COEF_K4 0xA2
97 #define THERMO9_PROM_READ_ADR_2_COEF_K3 0xA4
98 #define THERMO9_PROM_READ_ADR_3_COEF_K2 0xA6
99 #define THERMO9_PROM_READ_ADR_4_COEF_K1 0xA8
100 #define THERMO9_PROM_READ_ADR_5_COEF_K0 0xAA
101 #define THERMO9_PROM_READ_ADR_6_SN23_8 0xAC
102 #define THERMO9_PROM_READ_ADR_7_SN7_0_CHECKSUM 0xAE
109 #define THERMO9_COEF_CALC_4_2 -2
110 #define THERMO9_COEF_CALC_3 4
111 #define THERMO9_COEF_CALC_0 -1.5
112 #define THERMO9_CALC_COEF_4 1000000000000000000000.0
113 #define THERMO9_CALC_COEF_3 10000000000000000.0
114 #define THERMO9_CALC_COEF_2 100000000000.0
115 #define THERMO9_CALC_COEF_1 1000000.0
116 #define THERMO9_CALC_COEF_0 100.0
117 #define THERMO9_RES_MOD 256.0
296 #endif // _THERMO9_H_
pin_name_t chip_select
Definition: thermo9.h:167
pin_name_t scl
Definition: thermo9.h:185
spi_master_chip_select_polarity_t cs_polarity
Definition: thermo9.h:199
Temperature calibration coefficient.
Definition: thermo9.h:140
spi_master_t spi
Definition: thermo9.h:162
pin_name_t sda
Definition: thermo9.h:186
void(* thermo9_master_io_t)(struct thermo9_s *, uint8_t, uint8_t *, uint8_t)
Master Input/Output type.
Definition: thermo9.h:135
thermo9_master_io_t read_f
Definition: thermo9.h:169
uint16_t coef1
Definition: thermo9.h:143
Click ctx object definition.
Definition: thermo9.h:153
uint8_t i2c_address
Definition: thermo9.h:195
float thermo9_read_temp(thermo9_t *ctx)
Read temperature function.
Click configuration structure definition.
Definition: thermo9.h:181
pin_name_t sck
Definition: thermo9.h:189
void thermo9_cfg_setup(thermo9_cfg_t *cfg)
Config Object Initialization function.
pin_name_t miso
Definition: thermo9.h:187
void thermo9_calibation(thermo9_t *ctx)
Calibration function.
digital_out_t cs
Definition: thermo9.h:157
uint16_t coef0
Definition: thermo9.h:142
thermo9_select_t sel
Definition: thermo9.h:201
uint32_t i2c_speed
Definition: thermo9.h:194
void thermo9_generic_read(thermo9_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic read function.
uint16_t coef4
Definition: thermo9.h:146
void thermo9_send_cmd(thermo9_t *ctx, uint8_t cmd_byte)
Send command function.
uint16_t coef3
Definition: thermo9.h:145
thermo9_master_io_t write_f
Definition: thermo9.h:168
pin_name_t cs
Definition: thermo9.h:190
uint8_t slave_address
Definition: thermo9.h:166
struct thermo9_s thermo9_t
Click ctx object definition.
uint16_t coef2
Definition: thermo9.h:144
void thermo9_generic_write(thermo9_t *ctx, uint8_t reg, uint8_t *data_buf, uint8_t len)
Generic write function.
thermo9_temp_coef_t temp_coef
Definition: thermo9.h:174
i2c_master_t i2c
Definition: thermo9.h:161
spi_master_mode_t spi_mode
Definition: thermo9.h:198
thermo9_select_t master_sel
Definition: thermo9.h:170
pin_name_t mosi
Definition: thermo9.h:188
uint32_t spi_speed
Definition: thermo9.h:197
uint8_t thermo9_select_t
Communication type.
Definition: thermo9.h:130
#define THERMO9_RETVAL
Definition: thermo9.h:74
THERMO9_RETVAL thermo9_init(thermo9_t *ctx, thermo9_cfg_t *cfg)
Initialization function.