vibromotor  2.0.0.0
Main Page

Vibro Motor click

Vibro Motor click features a compact size Eccentric Rotating Mass (ERM) motor, labeled as C1026B002F. This type of motor is often used for haptic feedback on many small handheld devices, such as the cellphones, pagers, RFID scanners and similar devices. This motor contains a small eccentric weight on its rotor, so while rotating it also produces vibration effect. This kind of motors is sometimes referred to as coin motors, due to its shape.

click Product page


Click library

  • Author : Stefan Ilic
  • Date : Jun 2021.
  • Type : PWM type

Software Support

We provide a library for the VibroMotor Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Library Description

This library contains API for VibroMotor Click driver.

Standard key functions :

Example key functions :

Example Description

This application contorl the speed of vibro motor.

The demo application is composed of two sections :

Application Init

Configures PWM to 5kHz frequency, calculates maximum duty ratio and starts PWM with duty ratio value 0.

void application_init ( void ) {
log_cfg_t log_cfg;
vibromotor_cfg_t vibromotor_cfg;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, " Application Init " );
// Click initialization.
vibromotor_cfg_setup( &vibromotor_cfg );
VIBROMOTOR_MAP_MIKROBUS( vibromotor_cfg, MIKROBUS_1 );
err_t init_flag = vibromotor_init( &vibromotor, &vibromotor_cfg );
if ( PWM_ERROR == init_flag ) {
log_error( &logger, " Application Init Error. " );
log_info( &logger, " Please, run program again... " );
for ( ; ; );
}
vibromotor_set_duty_cycle ( &vibromotor, 0.0 );
vibromotor_pwm_start( &vibromotor );
log_info( &logger, " Application Task " );
}

Application Task

Allows user to enter desired command to control Vibro Motor Click board.

void application_task ( void ) {
static int8_t duty_cnt = 1;
static int8_t duty_inc = 1;
float duty = duty_cnt / 10.0;
vibromotor_set_duty_cycle ( &vibromotor, duty );
log_printf( &logger, "> Duty: %d%%\r\n", ( uint16_t )( duty_cnt * 10 ) );
Delay_ms( 500 );
if ( 10 == duty_cnt ) {
duty_inc = -1;
} else if ( 0 == duty_cnt ) {
duty_inc = 1;
}
duty_cnt += duty_inc;
}

The full application code, and ready to use projects can be installed directly from NECTO Studio Package Manager(recommended way), downloaded from our LibStock™ or found on Mikroe github account.

Other Mikroe Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.VibroMotor

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. UART terminal is available in all MikroElektronika compilers.


vibromotor_cfg_setup
void vibromotor_cfg_setup(vibromotor_cfg_t *cfg)
Vibro Motor configuration object setup function.
vibromotor_t
Vibro Motor Click driver selector.
Definition: vibromotor.h:93
application_task
void application_task(void)
Definition: main.c:66
vibromotor_cfg_t
Vibro Motor Click configuration object.
Definition: vibromotor.h:107
vibromotor_pwm_start
err_t vibromotor_pwm_start(vibromotor_t *ctx)
Vibro Motor start PWM module.
vibromotor_set_duty_cycle
err_t vibromotor_set_duty_cycle(vibromotor_t *ctx, float duty_cycle)
Vibro Motor sets PWM duty cycle.
application_init
void application_init(void)
Definition: main.c:31
vibromotor_init
err_t vibromotor_init(vibromotor_t *ctx, vibromotor_cfg_t *cfg)
Vibro Motor initialization function.
VIBROMOTOR_MAP_MIKROBUS
#define VIBROMOTOR_MAP_MIKROBUS(cfg, mikrobus)
MikroBUS pin mapping.
Definition: vibromotor.h:77
vibromotor_pwm_stop
err_t vibromotor_pwm_stop(vibromotor_t *ctx)
Vibro Motor stop PWM module.