gsm3  2.0.0.0
Modules | Functions
GSM 3 Click Driver

API for configuring and manipulating GSM 3 Click driver. More...

Modules

 GSM 3 Device Settings
 Settings for registers of GSM 3 Click driver.
 
 GSM 3 MikroBUS Map
 MikroBUS pin mapping of GSM 3 Click driver.
 

Functions

void gsm3_cfg_setup (gsm3_cfg_t *cfg)
 GSM 3 configuration object setup function. More...
 
err_t gsm3_init (gsm3_t *ctx, gsm3_cfg_t *cfg)
 GSM 3 initialization function. More...
 
err_t gsm3_generic_write (gsm3_t *ctx, uint8_t *data_in, uint16_t len)
 GSM 3 data writing function. More...
 
err_t gsm3_generic_read (gsm3_t *ctx, uint8_t *data_out, uint16_t len)
 GSM 3 data reading function. More...
 
void gsm3_set_rst_pin (gsm3_t *ctx, uint8_t state)
 GSM 3 set rst pin function. More...
 
void gsm3_set_rts_pin (gsm3_t *ctx, uint8_t state)
 GSM 3 set rts pin function. More...
 
void gsm3_set_pwk_pin (gsm3_t *ctx, uint8_t state)
 GSM 3 set pwk pin function. More...
 
uint8_t gsm3_get_cts_pin (gsm3_t *ctx)
 GSM 3 get cts pin function. More...
 
uint8_t gsm3_get_sta_pin (gsm3_t *ctx)
 GSM 3 get sta pin function. More...
 
void gsm3_send_cmd (gsm3_t *ctx, uint8_t *cmd)
 Send command function. More...
 
void gsm3_send_cmd_with_par (gsm3_t *ctx, uint8_t *at_cmd_buf, uint8_t *param_buf)
 Send command function with parameter. More...
 
void gsm3_send_cmd_check (gsm3_t *ctx, uint8_t *at_cmd_buf)
 Check the sent command. More...
 
void gsm3_send_cmd_par_check (gsm3_t *ctx, uint8_t *at_cmd_buf)
 Check the command parameters. More...
 
void gsm3_set_sim_apn (gsm3_t *ctx, uint8_t *sim_apn)
 Set sim card APN. More...
 
void gsm3_send_sms_text (gsm3_t *ctx, uint8_t *phone_number, uint8_t *sms_text)
 GSM 3 send SMS in text mode. More...
 
err_t gsm3_send_sms_pdu (gsm3_t *ctx, uint8_t *service_center_number, uint8_t *phone_number, uint8_t *sms_text)
 GSM 3 send SMS in PDU mode. More...
 

Detailed Description

API for configuring and manipulating GSM 3 Click driver.

Any initialization code needed for MCU to function properly. Do not remove this line or clock might not be set correctly.

Function Documentation

◆ gsm3_cfg_setup()

void gsm3_cfg_setup ( gsm3_cfg_t cfg)

GSM 3 configuration object setup function.

This function initializes click configuration structure to initial values.

Parameters
[out]cfg: Click configuration structure. See gsm3_cfg_t object definition for detailed explanation.
Returns
Nothing.
Note
The all used pins will be set to unconnected state.

◆ gsm3_generic_read()

err_t gsm3_generic_read ( gsm3_t ctx,
uint8_t *  data_out,
uint16_t  len 
)

GSM 3 data reading function.

This function reads a desired number of data bytes by using UART serial interface.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
[out]data_out: Output read data.
[in]len: Number of bytes to be read.
Returns
  • >0 - Number of data bytes read,
  • <=0 - Error/Empty Ring buffer. See #err_t definition for detailed explanation.
Note
None.

◆ gsm3_generic_write()

err_t gsm3_generic_write ( gsm3_t ctx,
uint8_t *  data_in,
uint16_t  len 
)

GSM 3 data writing function.

This function writes a desired number of data bytes by using UART serial interface.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
[in]data_in: Data buffer for sending.
[in]len: Number of bytes for sending.
Returns
  • >=0 - Success,
  • <0 - Error. See #err_t definition for detailed explanation.
Note
None.

◆ gsm3_get_cts_pin()

uint8_t gsm3_get_cts_pin ( gsm3_t ctx)

GSM 3 get cts pin function.

This function returns the Clear to Send (CTS) pin logic state.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
Returns
Pin logic state.
Note
None.

◆ gsm3_get_sta_pin()

uint8_t gsm3_get_sta_pin ( gsm3_t ctx)

GSM 3 get sta pin function.

This function returns the status (STA) pin logic state.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
Returns
Pin logic state.
Note
None.

◆ gsm3_init()

err_t gsm3_init ( gsm3_t ctx,
gsm3_cfg_t cfg 
)

GSM 3 initialization function.

This function initializes all necessary pins and peripherals used for this click board.

Parameters
[out]ctx: Click context object. See gsm3_t object definition for detailed explanation.
[in]cfg: Click configuration structure. See gsm3_cfg_t object definition for detailed explanation.
Returns
  • 0 - Success,
  • -1 - Error. See #err_t definition for detailed explanation.
Note
None.

◆ gsm3_send_cmd()

void gsm3_send_cmd ( gsm3_t ctx,
uint8_t *  cmd 
)

Send command function.

This function sends a specified command to the click module.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
[in]cmd: Command variable.
Returns
Nothing.
Note
None.

◆ gsm3_send_cmd_check()

void gsm3_send_cmd_check ( gsm3_t ctx,
uint8_t *  at_cmd_buf 
)

Check the sent command.

This function checks the command that is sent.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
[in]at_cmd_buf: Command buffer.
Returns
Nothing.
Note
None.

◆ gsm3_send_cmd_par_check()

void gsm3_send_cmd_par_check ( gsm3_t ctx,
uint8_t *  at_cmd_buf 
)

Check the command parameters.

This function checks the command that is sent.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
[in]at_cmd_buf: Command buffer.
Returns
Nothing.
Note
None.

◆ gsm3_send_cmd_with_par()

void gsm3_send_cmd_with_par ( gsm3_t ctx,
uint8_t *  at_cmd_buf,
uint8_t *  param_buf 
)

Send command function with parameter.

This function sends a command with specified parameter to the click module.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
[in]at_cmd_buf: Command buffer.
[in]param_buf: Parameter buffer.
Returns
Nothing.
Note
None.

◆ gsm3_send_sms_pdu()

err_t gsm3_send_sms_pdu ( gsm3_t ctx,
uint8_t *  service_center_number,
uint8_t *  phone_number,
uint8_t *  sms_text 
)

GSM 3 send SMS in PDU mode.

This function sends text message to a phone number in PDU mode.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
[in]service_center_number: SMSC of the SIM card.
[in]phone_number: Phone number to message.
[in]sms_text: Message to be sent.
Returns
  • >=0 - Success,
  • <0 - Error. See #err_t definition for detailed explanation.
Note
None.

◆ gsm3_send_sms_text()

void gsm3_send_sms_text ( gsm3_t ctx,
uint8_t *  phone_number,
uint8_t *  sms_text 
)

GSM 3 send SMS in text mode.

This function sends text message to a phone number.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
[in]phone_number: Phone number to message.
[in]sms_text: Message to be sent.
Returns
Nothing.
Note
None.

◆ gsm3_set_pwk_pin()

void gsm3_set_pwk_pin ( gsm3_t ctx,
uint8_t  state 
)

GSM 3 set pwk pin function.

This function sets the PWRKEY pin logic state.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
[in]state: Pin logic state.
Returns
None.
Note
None.

◆ gsm3_set_rst_pin()

void gsm3_set_rst_pin ( gsm3_t ctx,
uint8_t  state 
)

GSM 3 set rst pin function.

This function sets the RESET pin logic state.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
[in]state: Pin logic state.
Returns
None.
Note
None.

◆ gsm3_set_rts_pin()

void gsm3_set_rts_pin ( gsm3_t ctx,
uint8_t  state 
)

GSM 3 set rts pin function.

This function sets the Request to Send (RTS) pin logic state.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
[in]state: Pin logic state.
Returns
None.
Note
None.

◆ gsm3_set_sim_apn()

void gsm3_set_sim_apn ( gsm3_t ctx,
uint8_t *  sim_apn 
)

Set sim card APN.

This function sets APN for sim card.

Parameters
[in]ctx: Click context object. See gsm3_t object definition for detailed explanation.
[in]sim_apn: SIM card APN.
Returns
Nothing.
Note
None.