hbridge5  2.0.0.0
Main Page

H Bridge 5 click

The H-Bridge 5 Click is designed for control DC motors and inductiv loads. This Click boardâ„¢ contains the MP6515GF-Z, a H-bridge motor driver from MPS, It features an Full H-Bridge driver with Internal safety features include over-current protection, input over-voltage protection, under voltage lockout (UVLO), and thermal shutdown.

click Product page


Click library

  • Author : MikroE Team
  • Date : Dec 2019.
  • Type : I2C type

Software Support

We provide a library for the HBridge5 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for HBridge5 Click driver.

Standard key functions :

  • Config Object Initialization function.

    void hbridge5_cfg_setup ( hbridge5_cfg_t *cfg );

  • Initialization function.

    HBRIDGE5_RETVAL hbridge5_init ( hbridge5_t *ctx, hbridge5_cfg_t *cfg );

  • Click Default Configuration function.

    void hbridge5_default_cfg ( hbridge5_t *ctx );

Example key functions :

  • Function sets port.

    void hbridge5_set_port ( hbridge5_t *ctx, uint8_t port, uint8_t value );

  • Puts motor into reverse motion.

    void hbridge5_reverse ( hbridge5_t *ctx );

  • Puts motor into foreward motion.

    void hbridge5_foreward ( hbridge5_t *ctx );

Examples Description

This application controls DC motors and inductive loads.

The demo application is composed of two sections :

Application Init

Initalizes I2C driver, configures all ports as output and writes an initial log.

void application_init ( void )
{
log_cfg_t log_cfg;
LOG_MAP_USB_UART( log_cfg );
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
HBRIDGE5_MAP_MIKROBUS( cfg, MIKROBUS_1 );
hbridge5_init( &hbridge5, &cfg );
hbridge5_default_cfg( &hbridge5 );
}

Application Task

This example demonstrates the use of H-Bridge 5 Click board, by running dc motor forward, then stoping and then running it in reverse and stoping again.

void application_task ( void )
{
log_printf( &logger, "Mode - FORWARD\r\n" );
hbridge5_forward( &hbridge5 );
Delay_ms( 3000 );
log_printf( &logger, "Mode - SLEEP\r\n" );
Delay_ms( 3000 );
log_printf( &logger, "Mode - REVERSE\r\n" );
hbridge5_reverse( &hbridge5 );
Delay_ms( 3000 );
log_printf( &logger, "Mode - SLEEP\r\n" );
Delay_ms( 3000 );
}

Note

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.HBridge5

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.


hbridge5_sleep
void hbridge5_sleep(hbridge5_t *ctx, uint8_t state)
Sleep function.
HBRIDGE5_MAP_MIKROBUS
#define HBRIDGE5_MAP_MIKROBUS(cfg, mikrobus)
Definition: hbridge5.h:52
hbridge5_cfg_setup
void hbridge5_cfg_setup(hbridge5_cfg_t *cfg)
Config Object Initialization function.
HBRIDGE5_DISABLE_ALL_OUTPUT_PORT
#define HBRIDGE5_DISABLE_ALL_OUTPUT_PORT
Definition: hbridge5.h:107
application_task
void application_task(void)
Definition: main.c:59
hbridge5_default_cfg
void hbridge5_default_cfg(hbridge5_t *ctx)
Click Default Configuration function.
hbridge5_forward
void hbridge5_forward(hbridge5_t *ctx)
Puts motor into forward motion.
hbridge5_reverse
void hbridge5_reverse(hbridge5_t *ctx)
Puts motor into reverse motion.
hbridge5_init
HBRIDGE5_RETVAL hbridge5_init(hbridge5_t *ctx, hbridge5_cfg_t *cfg)
Initialization function.
application_init
void application_init(void)
Definition: main.c:33
hbridge5_cfg_t
Click configuration structure definition.
Definition: hbridge5.h:144