stspin233  2.0.0.0
Main Page

STSPIN233 click

STSPIN233 click is a complete solution for a 3-phase integrated motor driver, based on the STSPIN233, Low voltage 3-phase integrated motor driver.

click Product page


Click library

  • Author : MikroE Team
  • Date : Jan 2020.
  • Type : UART type

Software Support

We provide a library for the Stspin233 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Stspin233 Click driver.

Standard key functions :

Example key functions :

  • Send single command

    void stspin233_send_single_cmd ( stspin233_t *ctx, uint8_t *tx_buf );

  • Send double command

    void stspin233_send_double_cmd ( stspin233_t *ctx, uint8_t *cmd_buf, uint8_t *arg_buf );

  • Get INT pin state

    uint8_t stspin233_get_int_state ( stspin233_t *ctx );

Examples Description

This application is motor driver.

The demo application is composed of two sections :

Application Init

Initializes driver and configures the click board.

void application_init ( void )
{
log_cfg_t log_cfg;
// Logger initialization.
LOG_MAP_USB_UART( log_cfg );
log_cfg.level = LOG_LEVEL_DEBUG;
log_cfg.baud = 115200;
log_init( &logger, &log_cfg );
log_info( &logger, "---- Application Init ----" );
// Click initialization.
STSPIN233_MAP_MIKROBUS( cfg, MIKROBUS_1 );
stspin233_init( &stspin233, &cfg );
stspin233_default_cfg( &stspin233 );
}

Application Task

This example demonstrates the use of STSPIN233 Click board, by running the motor clockwise and counter clockwise. All results will be displayed on USB UART.

void application_task ( void )
{
log_printf( &logger, ">>> START MOTOR\r\n" );
stspin233_process( );
Delay_ms( 2000 );
log_printf( &logger, ">>> Set clockwise direction\r\n" );
stspin233_process( );
Delay_ms( 2000 );
log_printf( &logger, ">>> Set counter clockwise direction\r\n" );
stspin233_process( );
Delay_ms( 2000 );
log_printf( &logger, ">>> STOP MOTOR\r\n" );
stspin233_process( );
Delay_ms( 2000 );
stspin233_process( );
log_printf( &logger, ">>> STATUS: %.5s\r\n", &current_parser_buf[ 9 ] );
Delay_ms( 2000 );
log_printf( &logger, "------------------------------\r\n" );
}

Note

For all other commands that you can use to control your engine, see the firmware documentation. We used an 8 pole motor for the test.

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.Stspin233

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.


STSPIN233_MAP_MIKROBUS
#define STSPIN233_MAP_MIKROBUS(cfg, mikrobus)
Definition: stspin233.h:61
STSPIN233_CW_DIR
#define STSPIN233_CW_DIR
Definition: stspin233.h:100
STSPIN233_CMD_STATUS
#define STSPIN233_CMD_STATUS
Definition: stspin233.h:87
application_task
void application_task(void)
Definition: main.c:113
STSPIN233_CCW_DIR
#define STSPIN233_CCW_DIR
Definition: stspin233.h:101
stspin233_cfg_setup
void stspin233_cfg_setup(stspin233_cfg_t *cfg)
Config Object Initialization function.
STSPIN233_CMD_DIR_MOTOR
#define STSPIN233_CMD_DIR_MOTOR
Definition: stspin233.h:84
STSPIN233_CMD_STOP_MOTOR
#define STSPIN233_CMD_STOP_MOTOR
Definition: stspin233.h:83
stspin233_init
STSPIN233_RETVAL stspin233_init(stspin233_t *ctx, stspin233_cfg_t *cfg)
Initialization function.
STSPIN233_CMD_START_MOTOR
#define STSPIN233_CMD_START_MOTOR
Definition: stspin233.h:82
stspin233_send_double_cmd
void stspin233_send_double_cmd(stspin233_t *ctx, uint8_t *cmd_buf, uint8_t *arg_buf)
Send double command.
application_init
void application_init(void)
Definition: main.c:91
stspin233_default_cfg
void stspin233_default_cfg(stspin233_t *ctx)
Click Default Configuration function.
stspin233_cfg_t
Click configuration structure definition.
Definition: stspin233.h:203
stspin233_send_single_cmd
void stspin233_send_single_cmd(stspin233_t *ctx, uint8_t *tx_buf)
Send single command.