buck8  2.0.0.0
buck8.h
Go to the documentation of this file.
1 /*
2  * MikroSDK - MikroE Software Development Kit
3  * Copyright© 2020 MikroElektronika d.o.o.
4  *
5  * Permission is hereby granted, free of charge, to any person
6  * obtaining a copy of this software and associated documentation
7  * files (the "Software"), to deal in the Software without restriction,
8  * including without limitation the rights to use, copy, modify, merge,
9  * publish, distribute, sublicense, and/or sell copies of the Software,
10  * and to permit persons to whom the Software is furnished to do so,
11  * subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be
14  * included in all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
17  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
19  * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
20  * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
21  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
22  * OR OTHER DEALINGS IN THE SOFTWARE.
23  */
24 
33 // ----------------------------------------------------------------------------
34 
35 #ifndef BUCK8_H
36 #define BUCK8_H
37 
42 #ifdef PREINIT_SUPPORTED
43 #include "preinit.h"
44 #endif
45 
46 #ifdef MikroCCoreVersion
47  #if MikroCCoreVersion >= 1
48  #include "delays.h"
49  #endif
50 #endif
51 
52 #include "drv_digital_out.h"
53 #include "drv_digital_in.h"
54 
55 // -------------------------------------------------------------- PUBLIC MACROS
65 #define BUCK8_MAP_MIKROBUS( cfg, mikrobus ) \
66  cfg.rst= MIKROBUS( mikrobus, MIKROBUS_RST ); \
67  cfg.en= MIKROBUS( mikrobus, MIKROBUS_CS ); \
68  cfg.syn= MIKROBUS( mikrobus, MIKROBUS_PWM );
69 
75 #define BUCK8_RETVAL uint8_t
76 
77 #define BUCK8_OK 0x00
78 #define BUCK8_INIT_ERROR 0xFF
79 
85 #define BUCK8_MODE_ACTIVE 0x01
86 #define BUCK8_MODE_SLEEP 0x00
87  // End group macro
90 // --------------------------------------------------------------- PUBLIC TYPES
99 typedef struct
100 {
101  // Output pins
102 
103  digital_out_t rst;
104  digital_in_t en;
105  digital_out_t syn;
106 
107 } buck8_t;
108 
112 typedef struct
113 {
114  // Additional gpio pins
115 
116  pin_name_t rst;
117  pin_name_t en;
118  pin_name_t syn;
119 
120 } buck8_cfg_t;
121  // End types group
123 // ----------------------------------------------- PUBLIC FUNCTION DECLARATIONS
124 
130 #ifdef __cplusplus
131 extern "C"{
132 #endif
133 
143 
152 
165 
177 void buck8_set_power_mode ( buck8_t *ctx, uint8_t mode );
178 
190 uint8_t buck8_get_state ( buck8_t *ctx );
191 
192 
193 #ifdef __cplusplus
194 }
195 #endif
196 #endif // _BUCK8_H_
197  // End public_function group
200 
201 // ------------------------------------------------------------------------- END
buck8_cfg_t::syn
pin_name_t syn
Definition: buck8.h:118
buck8_set_power_mode
void buck8_set_power_mode(buck8_t *ctx, uint8_t mode)
Function settings mode.
buck8_t::en
digital_in_t en
Definition: buck8.h:104
buck8_get_state
uint8_t buck8_get_state(buck8_t *ctx)
Function reads state of pin.
buck8_cfg_t::rst
pin_name_t rst
Definition: buck8.h:116
buck8_cfg_t::en
pin_name_t en
Definition: buck8.h:117
buck8_t::rst
digital_out_t rst
Definition: buck8.h:103
buck8_init
BUCK8_RETVAL buck8_init(buck8_t *ctx, buck8_cfg_t *cfg)
Initialization function.
BUCK8_RETVAL
#define BUCK8_RETVAL
Definition: buck8.h:75
buck8_t
Click ctx object definition.
Definition: buck8.h:100
buck8_cfg_setup
void buck8_cfg_setup(buck8_cfg_t *cfg)
Config Object Initialization function.
buck8_default_cfg
void buck8_default_cfg(buck8_t *ctx)
Click Default Configuration function.
buck8_cfg_t
Click configuration structure definition.
Definition: buck8.h:113
buck8_t::syn
digital_out_t syn
Definition: buck8.h:105