dcmotor5
2.0.0.0
|
DC MOTOR 5 Click carries the DRV8701 brushed DC motor gate driver from Texas Instruments.
We provide a library for the DcMotor5 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly from compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for DcMotor5 Click driver.
void dcmotor5_cfg_setup ( dcmotor5_cfg_t *cfg );
DCMOTOR5_RETVAL dcmotor5_init ( dcmotor5_t *ctx, dcmotor5_cfg_t *cfg );
void dcmotor5_short_brake ( dcmotor5_t *ctx );
void dcmotor5_stop ( dcmotor5_t *ctx );
void dcmotor5_enable ( dcmotor5_t *ctx );
This library contains API for the DC Motor 5 Click driver. This application enables usage of brushed DC motor 5 gate driver.
The demo application is composed of two sections :
Initializes GPIO, PWM and logger and enables the Click board.
This is a example which demonstrates the use of DC Motor 5 Click board. DC Motor 5 Click controls DC Motor speed via PWM interface. It shows moving in the both directions from slow to fast speed and from fast to slow speed. Results are being sent to the Usart Terminal where you can track their changes.
The full application code, and ready to use projects can be installed directly form compilers IDE(recommended) or found on LibStock page or mikroE GitHub account.
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.