oximeter2
2.0.0.0
|
Oximeter 2 Click is a compact add-on board suitable for measuring blood oxygen saturation.
We provide a library for the Oximeter2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for Oximeter2 Click driver.
void oximeter2_cfg_setup ( oximeter2_cfg_t *cfg );
OXIMETER2_RETVAL oximeter2_init ( oximeter2_t *ctx, oximeter2_cfg_t *cfg );
uint8_t oximeter2_generic_read ( oximeter2_t *ctx, uint8_t reg );
uint8_t oximeter2_get_int_status ( oximeter2_t *ctx );
uint16_t oximeter3_read_value ( oximeter3_t *ctx, uint8_t type_macro );
This application collects data from the sensor, calculates it and then logs the result.
The demo application is composed of two sections :
Initializes driver and performs the device configuration which puts Time Slot A and Time Slot B modes to active state. Before the device configuration, the SW reset will be performed, which puts the registers in their initial state.
Application measures value of oxygen level in blood of a human.
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.