oximeter3
2.0.0.0
|
Oximeter 3 Click is a compact add-on board perfectly suited for measuring the blood oxygen saturation.
We provide a library for the Oximeter3 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for Oximeter3 Click driver.
void oximeter3_cfg_setup ( oximeter3_cfg_t *cfg );
OXIMETER3_RETVAL oximeter3_init ( oximeter3_t *ctx, oximeter3_cfg_t *cfg );
uint8_t oximeter3_generic_read ( oximeter3_t *ctx, uint8_t reg );
uint8_t oximeter3_get_int_status ( oximeter3_t *ctx );
uint16_t oximeter3_read_value ( oximeter3_t *ctx, uint8_t type_macro );
This example demonstrates the use of Oximeter 3 Click board.
The demo application is composed of two sections :
Initializes the driver, checks the device ID then configures the device for the selected mode.
Depending on the selected mode it reads heart rate data (OXIMETER3_HEART_RATE mode) or values of proximity and ambient light sensor (OXIMETER3_PROX or OXIMETER3_ALS modes). All data is being logged on USB UART where you can track their changes.
In the case of heart rate, please use a Serial Plot application for data plotting.
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART Click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.