audioxover  2.0.0.0
Functions
main.c File Reference

Audio Xover Click example. More...

#include "board.h"
#include "log.h"
#include "audioxover.h"

Functions

void application_init (void)
 
void application_task (void)
 
void main (void)
 

Detailed Description

Audio Xover Click example.

Description

This example demonstrates the use of the Audio Xover click board. The click is an analog active crossover solution for two-way loudspeakers. The primary purpose of the crossover circuit in a loudspeaker is to split an incoming audio signal into frequency bands that are passed to the speaker best suited.

The demo application is composed of two sections :

Application Init

This function initializes the driver and makes an initial log.

Application Task

This function enables and disables the click board every 10 seconds, and logs an appropriate message on the USB UART.

Note
The hardware revision v100 of the click board works only with MCUs that operates at 5V operating voltage level.
Author
MikroE Team

Function Documentation

◆ application_init()

void application_init ( void  )

◆ application_task()

void application_task ( void  )

◆ main()

void main ( void  )