audioxover
2.0.0.0
|
Audio Xover Click example. More...
Functions | |
void | application_init (void) |
void | application_task (void) |
void | main (void) |
Audio Xover Click example.
This example demonstrates the use of the Audio Xover click board. The click is an analog active crossover solution for two-way loudspeakers. The primary purpose of the crossover circuit in a loudspeaker is to split an incoming audio signal into frequency bands that are passed to the speaker best suited.
The demo application is composed of two sections :
This function initializes the driver and makes an initial log.
This function enables and disables the click board every 10 seconds, and logs an appropriate message on the USB UART.
void application_init | ( | void | ) |
void application_task | ( | void | ) |
void main | ( | void | ) |