mram2
2.0.0.0
|
MRAM 2 Click is a compact add-on board for applications that must store and retrieve data and programs quickly using a small number of pins.
We provide a library for the Mram2 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.
This library contains API for Mram2 Click driver.
void mram2_cfg_setup ( mram2_cfg_t *cfg );
MRAM2_RETVAL mram2_init ( mram2_t *ctx, mram2_cfg_t *cfg );
void mram2_wren ( mram2_t *ctx );
void mram2_sleep ( mram2_t *ctx );
void mram2_write ( mram2_t *ctx, uint32_t mem_adr, uint8_t *wr_data, uint8_t n_bytes );
This example demonstrates the use of MRAM 2 Click board.
The demo application is composed of two sections :
Initializes the driver, sets the write protect and disables the hold signal.
Writes "MikroE" into the first 6 memory locations, and then reads it back and displays it to the USB UART approximately every 5 seconds.
The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.
Other mikroE Libraries used in the example:
Additional notes and informations
Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.